







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCustom & Geometric Windows in Kendale Lakes, FL
Custom and geometric windows are made to order for openings that stock windows can’t fill: arches, circles, half-rounds, trapezoids, angled gables, and full wall systems built from more than one shape. In Kendale Lakes, this usually comes up when a homeowner opens up a dated floor plan, finishes a covered patio, or replaces the original 1980s aluminum units that came with so many homes off Miller Drive and Coral Way. We build these openings to fit the architecture instead of forcing the architecture to fit a catalog.
Specialty glass is unforgiving. A half-round that’s cut a quarter inch off shows a light gap at the frame line. A gable triangle out of square throws every mullion on the wall. Our technicians have up to 12 years of experience setting custom units, and every project carries the 730-Day Done Right Promise: if it’s not done right, we make it right. Call (844) 834-8961 and a live person picks up, day or night. We handle this work as part of our Windows & Doors service, and you can see how that fits into everything else we build on our home page.
Key Takeaways
- Custom and geometric windows are ordered to exact field measurements for arched, round, angled, and multi-shape openings that stock sizes can’t cover.
- Lead times in Kendale Lakes typically run 6 to 10 weeks for true custom units, longer for radius walls and ganged systems.
- Expect roughly $1,100 to $3,800 per custom unit before installation, depending on shape, glass package, and frame material.
- Every job is backed by the 730-Day Done Right Promise. Background-checked, uniformed technicians on every visit.

When You Need Custom & Geometric Windows
Most Kendale Lakes homeowners don’t set out to buy a custom window. They find one problem that stock can’t solve. Here’s how it usually starts:
- You’re replacing original 1980s or early-1990s aluminum units and the opening isn’t a standard size. A lot of the ranch and Mediterranean-revival homes in the neighborhoods off SW 117th Avenue and SW 137th Avenue were built when builders trimmed openings on site, so two houses on the same street can have openings that differ by an inch or two.
- You have a gable end you want to fill with glass instead of siding. That triangle above the entry or in the great room is dead space until it’s a fixed geometric window. It’s also the window most likely to be measured wrong by a crew in a hurry.
- You want an arched transom over a front door or a picture window. Half-rounds and eyebrows over entries are one of the most requested shapes we see in western Miami-Dade, and they almost never line up with an off-the-shelf unit.
- You’re adding a covered patio or screened enclosure and want a defined glass wall. Corner radius windows, fixed lites grouped with operating doors, and trapezoids that follow a sloped roofline are common on the rear of Kendale Lakes homes facing a canal or lake lot.
- You’re finishing a staircase or a two-story foyer and need a stacked or circular feature. A round window or a vertical stack of shapes pulls light into a stairwell that would otherwise stay dim all afternoon.
- A storm or wind-borne debris took out a unit and the original maker is gone. After any major weather event, we get calls about custom units that no longer match a stock catalog line, and the replacement has to be built to the opening as it stands.
If any of that sounds like your project, the next step is a site visit, not a phone quote. Shapes can’t be priced from a rough measurement. Call (844) 834-8961 and we’ll get someone out to measure.
Our Custom & Geometric Windows Process
Custom glass is a measurement business before it’s a construction business. Here’s the sequence we follow so the unit that shows up on the job is the unit that fits the opening:
- In-home consultation and design discussion. We walk the opening with you, take photos and notes, and talk through shape, frame material, glass package, and whether the window is fixed or operating. For gable and radius work we talk about how the opening will be trimmed and flashed, because that affects the order. This is also where we lay out upfront pricing, so the number you see is the number you pay.
- Field measurement and template. For radius and arch units we build a physical template of the opening, not just a set of numbers. On gable triangles we check the rafter pitch and confirm the opening is square at the base. This is the step where a lot of problems get caught before they become a re-order.
- Order from a verified manufacturer. We work with established window brands including Andersen and Pella, and we spec frame, sash, hardware, and low-E glass to match Florida’s climate and code requirements for your area. Orders for true geometric units go into production at the factory, so lead time starts here.
- Installation day. Background-checked, uniformed technicians arrive with the unit, remove the old window if there is one, prep and flash the opening, set and shim the unit, insulate, and trim. Most single custom units go in within a day. Larger ganged walls and radius walls take longer.
- Sealing, finishing, and walkthrough. We seal the exterior, finish interior trim as agreed, clean up, and walk the work with you so you can open, close, latch, and inspect every operating sash. If something isn’t right, we fix it before we leave.
- 730-Day Done Right Promise. From the day we finish, your workmanship is covered for 730 days. That’s roughly two years, and it’s one of the longest workmanship guarantees in the residential construction space. If a seal fails, a unit doesn’t operate correctly, or something we installed goes wrong, we come back and make it right.
We do the same measurement-first process on standard replacements too. If you’re not sure whether your opening needs a custom unit or a stock one, read our guide to window replacement in Kendale Lakes and then call us to settle it.

Custom & Geometric Windows Pricing in Kendale Lakes
Custom and geometric windows in Kendale Lakes typically cost $1,100 to $3,800 per unit for the window itself, before installation. Installed, most single custom units land between $1,800 and $5,200, and full geometric wall systems built from several shapes run higher. That’s a wide range because a fixed half-round in vinyl and a large radius operating unit in wood with a high-performance glass package are two very different products.
| Line item | Typical range |
|---|---|
| Fixed arch, half-round, or eyebrow (vinyl or aluminum-clad) | $1,100 – $2,400 per unit |
| Fixed geometric gable or trapezoid | $1,400 – $3,200 per unit |
| Operating geometric unit (casement or awning in a radius or angled frame) | $2,400 – $3,800 per unit |
| Round or circular feature window | $1,900 – $4,200 per unit |
| Custom wood or wood-clad radius unit | $3,000 – $5,500+ per unit |
| Installation labor, flashing, and trim (single unit) | $600 – $1,400 |
| Ganged or stacked multi-shape wall system | Quoted per project |
What moves the number most:
- Shape complexity. A single half-round is straightforward. A segmented arch made from four matched units, or a full circle built from curved segments, is a production job that costs more and takes longer.
- Frame material. Vinyl and aluminum-clad are the lower end. Wood and wood-clad units, which many Kendale Lakes homeowners choose for the front of the house, add cost.
- Glass package. Impact-rated glass, low-E coatings, and laminated panes raise the price. For homes in this part of Miami-Dade, impact glass is usually worth discussing given the storm exposure.
- Size. Radius and arch units are priced by area, so a big transom costs more than a small eyebrow.
- Operating vs. fixed. Fixed units are less expensive. Any unit that opens adds hardware and cost.
- Trim, flashing, and interior finish. Custom shapes often need custom trim. We price that upfront, not after the fact.
Two things make the budget easier. First, the quote you get from us is the quote you pay. No-hassle upfront pricing, no change-order surprises. Second, we offer 0% financing for 18 months and $1,000 off projects over $10,000, which matters on a multi-unit project or a geometric wall where you’re ordering four or five pieces at once. If you want an exact number, call (844) 834-8961. Estimates and design consults are free.
Windows, Doors, and Materials That Match the House
A geometric window is usually a feature, which means it gets looked at more than the rest of the windows on the house. Matching frame profile, finish, and sightlines to what’s already installed matters. We spec windows from Andersen and Pella, both of which offer curved and angled units in their catalogs, and we carry those options into the same project when the rest of the openings need updating.
If your project runs into fencing at the property line or a gate near the window wall, we handle that too. On the fence side we install Barrette and Master Halco, so the same contractor that sets the window wall can close out the yard. Perimeter projects like a gate and a window wall on the same lot are a good fit for a single point of contact. You can read more about that work on our fence installation page.
For the framing and trim side, we build with James Hardie products when the gable or opening needs exterior trim that holds up in South Florida humidity. The point is that a geometric window rarely stands alone. It ties into siding, trim, interior millwork, and sometimes a door or a pergola. We plan the whole opening, not just the unit.
Why Custom Shapes Need a Contractor, Not a Catalog Order
Here’s the difference between a stock window and a custom one, in practical terms. A stock window has a published size and tolerance. The installer sets it in the opening and adjusts trim to cover gaps. A custom shape has no tolerance to hide behind. The unit arrives made to your template. If the template was wrong, the unit is wrong, and re-ordering costs another 6 to 10 weeks.
That’s why we template radius and arch units and re-verify gable openings on site. It’s also why we don’t hand off geometric work to a subcontractor we haven’t worked with. Background-checked, uniformed technicians do the installation on every job, and the person who measured the opening is the same team that sets the unit.
One more thing worth knowing for Kendale Lakes. A lot of these homes sit on canal and lake lots with strong afternoon sun exposure on the west and south walls. A geometric window in a gable facing that direction will take heat all afternoon. We spec low-E and laminated glass on those exposures as a matter of course, and we talk about it at the design stage so it’s priced in, not added later.
What to Check Before You Sign
Before you commit to a custom window order, ask the contractor a short list of questions. If the answers are vague, that’s your answer:
- Will you template the opening, or just measure it? Radius and arch units should be templated. If a crew plans to measure and order from numbers alone, ask how they’ll handle the curve.
- What’s the lead time, in writing? True custom units run 6 to 10 weeks in this market, sometimes longer. Anyone promising a custom radius window in two weeks is either guessing or not telling you the full story.
- Who’s installing it? Ask whether the installation is done by the same company that measured. Ask if technicians are background-checked.
- What’s the workmanship warranty? Our answer is the 730-Day Done Right Promise. If the number you hear is 90 days or a year, understand that’s what you’re getting.
- Is the price fixed? No-hassle upfront pricing means the number you see is the number you pay. Get it in writing.
We’re glad to walk through these with you before you decide anything. That’s a free consult, no obligation. Call (844) 834-8961 and we’ll set it up.
Areas We Serve Around Kendale Lakes
Kendale Lakes is a big part of the work we do, but it’s not the only place we install. If you’re in a neighboring community, we cover it. You can see a full list on our Kendale Lakes service area page, along with individual pages for nearby neighborhoods:
- Kendall for homes near the turnpike and the older ranch stock along Kendall Drive
- The Hammocks for the larger two-story homes and gable ends that suit geometric windows
- Westchester for the mid-century homes that often need custom sizes when opening up a floor plan
- Sweetwater for homes near the university corridor
- Fontainebleau for the mixed-age housing near the west side parks
- Sunset for the neighborhoods south of Kendall Drive
- Palmetto Bay for larger lots with more exterior glass
- Pinecrest for custom and architect-designed homes with more complex glazing
- Cutler Bay for the south county corridor
- Miami for the broader city, including remodel projects in older neighborhoods
FAQs – Custom & Geometric Windows
How much do custom and geometric windows cost in Kendale Lakes?
Custom and geometric windows in Kendale Lakes typically cost $1,100 to $3,800 per unit before installation, and most installed single units land between $1,800 and $5,200. The price depends on shape, frame material, glass package, and size. A fixed vinyl half-round is at the low end, and a wood-clad radius operating unit with impact glass is at the high end. Call (844) 834-8961 for an exact quote. Estimates are free.
How long does it take to get a custom window installed?
Plan on 6 to 10 weeks from order to installation for a true custom unit, and longer for radius walls, ganged shapes, or wood units. Production time at the factory is the bulk of that. The installation itself often takes one day for a single unit. We give you a written lead time at the time of order so you know what to plan around. Call (844) 834-8961 and we’ll talk through timing for your opening.
Can you match the new window to my existing windows?
In most cases, yes. We match frame profile, finish, and sightlines to what’s already on the house, and we order from manufacturers including Andersen and Pella that offer curved and angled units in matching lines. If your existing windows are older aluminum with a discontinued profile, we’ll tell you upfront what can and can’t be matched, and price the alternative. Call (844) 834-8961 for a free consult and we’ll look at it on site.
Is it cheaper to repair or replace a geometric window?
Replace is almost always the right call for a damaged geometric window. Custom shapes can’t be repaired with standard parts, and a failed seal or cracked radius pane can’t be patched to hold up. Replacement means re-templating the opening and ordering a new unit, which is the only way to get a warrantable result. Call (844) 834-8961 and we’ll assess it and give you a straight answer on cost.
Do custom windows in Kendale Lakes need to meet Florida impact code?
For most homes in Miami-Dade, exterior windows need to meet wind-borne debris requirements, which usually means impact-rated glass or approved shutters. A custom window is ordered to meet that standard for your specific opening, and we spec the glass accordingly. We confirm the requirement for your address and price the right glass the first time. Call (844) 834-8961 for a free estimate.
What is the 730-Day Done Right Promise?
The 730-Day Done Right Promise means every project we install is covered by a workmanship guarantee for 730 days after completion. If something we installed isn’t right within that window, we come back and make it right. That’s roughly two years, and it’s one of the longest workmanship guarantees in the residential construction space. Call (844) 834-8961 and we’ll put it in writing on your quote.
Ready to Talk Through Your Project?
Custom and geometric windows are one of the few parts of a remodel where getting it wrong is expensive and slow to correct. That’s why we lead with measurement, template the curves, and back the installation with the 730-Day Done Right Promise. Background-checked, uniformed technicians arrive on schedule. Upfront pricing means the number you see is the number you pay, and 0% financing for 18 months plus $1,000 off projects over $10,000 makes a multi-window project easier to move forward. When you’re ready to talk, we’re ready to answer. Call (844) 834-8961 for a free estimate. A live person picks up, day or night.
Written by the team at Groundwork Construction Co. of Kendale Lakes, serving Kendale Lakes.


