







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Coral Terrace, FL: What the Job Actually Takes
A chain link fence in Coral Terrace, FL typically runs $3,500 to $9,000 for a standard residential lot, and most jobs are finished in two to four working days from the day we set posts. The number lands high or low based on linear footage, height, gate count, and how much old fencing or concrete has to come out first. Call (844) 834-8961 for a free on-site estimate with a written line-item price.
How a Chain Link Fence Goes In, Stage by Stage

This isn’t a job where we show up, unroll wire, and leave. The sequence matters more than most homeowners expect, because a chain link fence that sags or leans in two years was almost always a post-setting problem on day one.
Stage 1: Site walk and utility locate (day 1, half a day)
We walk the property line with you and confirm the exact run, gate positions, and height. Before anyone digs, Florida’s utility locate process gets called in, and in Coral Terrace that matters because mid-century lots here often have irrigation lines, old pool plumbing, or undocumented conduit running along the rear property line. You decide gate swing direction and whether you want a drive gate or a walk gate at this stage. Getting that wrong is the most common reason a fence gets rebuilt.
Stage 2: Demo and layout (day 1 into day 2)
Old fencing comes out, and posts get laid out on string lines at consistent spacing, usually 8 to 10 feet on center. If there’s existing concrete along the line, a chain-wall saw gets run to cut clean edges. This is also where we check grade: a fence run that looks flat often isn’t, and posts need to follow the ground smoothly rather than stepping in visible jumps.
Stage 3: Post holes and setting (day 2, most of the day)
Terminal posts, corner posts, and gate posts get set deeper and in concrete because they carry the tension of the entire run. We use a fast-setting mix like Sakrete for post collars so the fence can be tensioned the same week instead of sitting overnight. Line posts get set plumb and checked against the string on every single one.
Stage 4: Rails, tension wire, and fabric (day 3)
Top rail goes on first, then the chain link fabric gets pulled and tied off, and a bottom tension wire gets installed to keep the mesh from lifting. Tensioning is the part that separates a fence that stays tight from one that develops a wave along the top rail within a season.
Stage 5: Gates, hardware, and final walkthrough (day 3, a few hours)
Gate frames get hung, latch hardware gets set, and we walk the whole run with you checking for gaps at the bottom, a level top rail, and gates that swing and self-close properly. County inspection, if your scope requires one, gets scheduled here. Final payment happens after you’ve walked it, not before.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make on a Chain Link Fence
Chain link is one of the few fence types where picking the right options at the start costs almost nothing, and fixing the wrong ones later costs the whole job over again.
- Gauge of the mesh: 11.5-gauge is the lighter residential standard, and 9-gauge is heavier and far more resistant to denting and dog chewing. The heavier wire runs noticeably more per linear foot but is what we recommend for any yard with large dogs or kids who hit the fence with a ball.
- Height and top rail: 4-foot is common for a decorative front property line, 5-foot and 6-foot are standard for backyard privacy and pet containment. A heavier top rail keeps the run from bowing over a long span.
- Vinyl-coated vs. galvanized: Galvanized steel is the classic silver finish and holds up well in Miami humidity, but the vinyl-coated product (usually black or green) resists salt air and UV chalking better and tends to look sharper longer against tropical landscaping.
- Post setting method: Concrete-set posts are the standard. Driven posts are faster but don’t hold in Coral Terrace’s sandier pockets, so we don’t use them here.
- Gate selection: Walk gates, drive gates, and double swing gates each add cost and need heavier framing. Decide up front which openings you actually use daily.
- Privacy options: Slats or privacy tape woven into the chain link turns it into a visual screen without changing the structure. It adds material cost, not fence cost.
What a Chain Link Fence Costs in Coral Terrace, FL

Plan on $3,500 to $9,000 for a typical Coral Terrace residential chain link fence. Small front-yard runs and single-side property lines land near the low end, while a full perimeter with multiple gates pushes toward the top.
The variables that move the number:
- Linear footage: the single biggest driver. A 150-foot run and a 400-foot run are different budgets.
- Height and gauge: 6-foot 9-gauge costs meaningfully more per foot than 4-foot 11.5-gauge.
- Gates: each drive gate or double gate adds its own cost in framing and hardware.
- Removal of existing fence or concrete: tearing out old chain link, wood, or a concrete curb along the line adds labor and disposal.
- Permit scope: a fence that needs a Miami-Dade County permit and inspection adds administrative cost and a day or two of scheduling.
Your written estimate itemizes fence linear footage, gate count, gauge, coating, demo, and permit fees separately so you can see exactly where the money goes. Upfront pricing, no surprises: the number you see is the number you pay, and it’s backed by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Coral Terrace Homes Specifically Do to This Job
Coral Terrace is one of the unincorporated pockets of Miami-Dade County wedged between Coral Gables and South Miami, which means a fence here answers to Miami-Dade’s unincorporated building and zoning code, not a neighboring city’s stricter design review. That distinction is real and it catches people out: a property on a block bordering Coral Gables can require a county permit while the house directly across the street falls under a different jurisdiction. Contractors who assume one set of rules get red-tagged.
The housing stock shapes it too. Most of the lots here hold 1950s and 1960s single-story concrete block ranches with stucco over lath, and the property lines often carry the scars of old work: original galvanized plumbing, unpermitted additions from decades past, and irrigation lines that don’t show up on any drawing. We locate them before we dig. Subtropical UV and year-round humidity also mean a fence gets beat on harder here than in most of the country, which is why vinyl-coated and heavier-gauge product tends to be worth the upgrade in ZIP 33155.
If you’re replacing a fence as part of a larger project, this often ties into Fence Installation in Coral Terrace. Homeowners occasionally pair it with Door Installation in Coral Terrace when they want a new gate and entry landing done together, and ADU Site Prep & Utilities in Coral Terrace comes up when a rear fence line has to move around a new structure. Our fence installation service covers the broader scope, and you can see everything we handle on the Coral Terrace service-area page.
Serving Coral Terrace, FL – Our Local Coverage Area
We serve Coral Terrace and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Coral Terrace

Most residential jobs take two to four working days once material is on site, with the largest portion going to post setting and tensioning. Permit turnaround through Miami-Dade County, when it’s required, is the wild card and can add a week or two before we ever break ground. Call (844) 834-8961 and we’ll give you a realistic start date, not an optimistic one.
Fence permits in unincorporated Coral Terrace fall under Miami-Dade County, and whether yours needs one depends on height and placement relative to the property line. We handle the permit paperwork and inspection scheduling as part of the scope when it’s required, and we tell you up front in writing whether your job needs one. Call (844) 834-8961 to find out what your specific property requires.
Yes, in most cases: we hand-dig near known utility lines and use utility locates before any post hole gets cut. Standard post holes here are around 2 feet deep and roughly 8 to 10 inches across, so the lawn disruption is limited to the post line, not the whole yard. Call (844) 834-8961 and we’ll walk the site with you before anything is dug.
Expect $3,500 to $9,000 for a full residential perimeter, with front-yard-only runs and single property lines landing lower. Gates, heavier 9-gauge wire, vinyl coating, and demo of an old fence move it toward the high end. Call (844) 834-8961 for an exact quote; estimates are free.
Your fence is covered by our 730-Day Done Right Promise, which means if something isn’t right, we make it right, for two full years after install. That covers workmanship on post setting, tensioning, and gates. Calls are answered by a live person 24/7, so a gate that drops or a section that loosens gets handled without a voicemail chain.
Get a Free Chain Link Fence Estimate in Coral Terrace
If you’re ready to price a chain link fence in Coral Terrace, call (844) 834-8961 and we’ll set up a free on-site estimate. On the call we’ll confirm your property line, ask about gates and height, and flag whether a Miami-Dade County permit applies. You leave with a written line-item quote, a timeline, and the 730-Day Done Right Promise in writing.
Written by the team at Groundwork Construction Co.












