







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Does Cost Per Window to Install Run in Kendale Lakes, FL?
Installing impact-rated windows in Kendale Lakes runs about $800 to $2,200 per window, fully installed, and that range sits roughly 40% to 60% above what the same window would cost in most of the country. The gap isn’t labor or markup; it’s Miami-Dade’s High Velocity Hurricane Zone code, which makes every replacement a permitted, engineered event. Groundwork Construction Co. of Kendale Lakes handles the whole sequence, and you can get an exact per-opening number by calling (844) 834-8961. Estimates are free, and a live person answers.


Why a Miami-Dade Permit Changes the Math
Here’s the part that trips up homeowners who’ve priced windows before. It doesn’t matter whether you’re replacing one window or twenty; once you pull a Miami-Dade permit for window work in Kendale Lakes, every opening on that permit has to meet current HVHZ wind-load specs. There’s no grandfathering in a single window that happens to look fine on the national average calculator.
That means each opening carries a product with a published Notice of Acceptance (NOA) number covering the frame and glazing for this wind zone, plus the fastening schedule and water-resistive detailing that go with it. The national average most people see online ($400 to $700 per window) doesn’t include that engineering layer, because most of America doesn’t require it. In Kendale Lakes, it’s the baseline.
Kendale Lakes is a large, build-out 1970s-80s subdivision west of the Turnpike, so nearly all of this work is retrofit on existing concrete-block homes rather than fresh construction. That matters because retrofit openings in CBS (concrete block with stucco) walls need a buck-and-sill condition assessment before anyone orders a window. We regularly find rot, spalling concrete, or failing sill pans behind old frames in these homes, and none of that gets fixed by a per-window price pulled off a website.
What Should You Compare on a Per-Window Quote?
When three bids land in your inbox and they’re $600 apart per window, the difference is almost always in what’s included, not the glass itself. Use this checklist and hold every contractor to it:
- NOA numbers on paper. The window product line, glazing, and frame should carry a published Miami-Dade NOA that applies to your wind-load requirements. If a bidder can’t produce it up front, the price isn’t comparable.
- Permit and inspection costs itemized. One HVHZ permit covers the whole job; ask whether the permit fee, engineering review, and inspection cycle are in the number or “extra.”
- Stucco repair scope. Every impacted opening opens a patch in the stucco. Confirm whether the bid includes repair and re-finish to match, or leaves you to call a mason after the fact.
- Buck and sill condition assessment. A real bidder walks the openings and notes what’s behind the old frame before quoting.
- What happens after install. Ask what the workmanship guarantee actually says and for how long.
Our approach to that last point is the 730-Day Done Right Promise: if it isn’t done right, we make it right, two full years after the final walkthrough. That’s the kind of thing you want written down before work starts.

Line-Item Window Pricing for Kendale Lakes
Per-opening pricing depends on size and the impact-glass tier you choose, so the range below is real-world installed cost, not catalog pricing. Whole-house work is shown for context because the economics change sharply once you’re replacing several openings under one permit.
| Scope | Installed Cost Range |
|---|---|
| Single impact window, standard size | $800-$1,400 |
| Single impact window, large or specialty | $1,400-$2,200 |
| Whole-house impact window replacement (typical) | $8,000-$25,000 |
| Non-impact window replacement (where code allows) | $4,500-$15,000 |
Those per-window numbers reflect what we see on real Kendale Lakes jobs, and they hold across the surrounding area; you can see how we cover the broader community on our Kendale Lakes service area page. For the full category, doors included, look at Windows & Doors.
Does Replacing Every Window at Once Actually Cost Less?
Yes, and by a wider margin here than almost anywhere else. The fixed costs of an HVHZ window job are real: one permit, one engineering review, one inspection cycle, and one stucco-repair mobilization. Spread those across a single opening and they’re brutal; spread them across twelve and they nearly vanish per window.
Here’s the rough shape of it. The permit and engineering review is a fixed cost regardless of how many openings are on the permit. The inspection cycle is one sequence, not one per window. And the stucco repair crew mobilizes once, then patches every impacted opening on the same visit. A homeowner replacing one window often ends up near the top of the per-window range; a homeowner replacing the whole house typically lands closer to the bottom of the $800-$2,200 range because that fixed overhead gets divided by every opening on the job.

That’s why our $1,000 off projects over $10,000 matters here. Whole-house replacement – the most cost-efficient path under HVHZ permit logic – is exactly the kind of project that clears the threshold, and the discount stacks with 0% financing for 18 months. The number you see is the number you pay; no quote-day surprises.
Which Window Brands Actually Do the HVHZ Paperwork?
Not every manufacturer is equally well-documented for this wind zone, and that gap causes real delays. Andersen and Marvin impact lines are pre-engineered for HVHZ compliance with published NOA numbers, which removes the field uncertainty that comes from sourcing through less-documented suppliers. When the product and the paperwork line up before the crew arrives, the inspection goes the way it should.
The same logic applies to prefab and panelized options. Partners like Dvele and Mighty Buildings build to high-wind engineering standards, which is worth knowing if your project leans toward an addition or a rework rather than a straight replacement. The point across all of it is that materials should be chosen for compliance and longevity, not just availability – from foundation to finish line, one contractor accountable for the whole scope.
One more thing about this housing stock: homes here were built at the transition from pre- to post-Andrew code, so decking, straps, and opening protection often need upgrading even on a simple job. Plan for the fact that opening protection is now part of the code conversation, not an optional add-on.
Are the Crews Doing the Work Qualified?
Every technician who shows up at your door has been background-checked and arrives in uniform. Our technicians have up to 12 years of experience, and calls are answered by a live person 24 hours a day – no voicemail, no waiting until Monday. If something comes up after installation, you reach someone who can act on it.
We also walk every job with HOA architectural review in mind. In the planned sections of Kendale Lakes, approval steps can add time before work begins, and a contractor who’s done it before will flag that early rather than after you’ve signed.
FAQs
Installed cost per impact window in Kendale Lakes runs $800 to $2,200, depending on size and glass tier. That’s about 40% to 60% above national averages because of Miami-Dade HVHZ requirements for NOA-certified frames and glazing. Whole-house replacement typically lands between $8,000 and $25,000. Call (844) 834-8961 for an exact quote on your openings – estimates are free.
Yes. Replacing all windows under a single Miami-Dade permit saves the fixed cost of one permit, one engineering review, one inspection cycle, and one stucco-repair mobilization across every opening, which pulls your per-window number toward the low end of the range. Our $1,000 off projects over $10,000 helps whole-house jobs, and 0% financing for 18 months spreads the rest. Call (844) 834-8961 to price a full replacement.
HVHZ code. Once a window permit is pulled in Kendale Lakes, every opening on that permit has to meet current Miami-Dade wind-load specs with a published NOA number covering frame and glazing, plus the fastening and flashing detail that goes with it. The national average doesn’t include permitting or engineering for hurricane-zone compliance. Call (844) 834-8961 and we’ll break down your specific openings.
Timeline depends on permit turnaround and product lead time, and a live person can give you a real answer today. Every project is covered by the 730-Day Done Right Promise, and quotes are upfront with no surprises. Call (844) 834-8961 to schedule a free estimate and design consult.
Get an Exact Per-Window Number
Price per window in Kendale Lakes has a floor set by HVHZ compliance, and knowing that floor keeps you from chasing a number that doesn’t exist. Get a free estimate and design consult from Groundwork Construction Co. of Kendale Lakes. Upfront pricing, no surprises, billed by the opening. Call (844) 834-8961 and a real person picks up, any hour.
Written by the team at Groundwork Construction Co. of Kendale Lakes, serving Kendale Lakes, FL.
What Our Customers Say
"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson












