







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterBefore we get into the vinyl vs aluminum fence comparison, here’s the short version: choose aluminum on south- and west-facing runs that take direct sun with little shade, and choose vinyl on north- and east-facing runs or under tree canopy where the temperature swings are gentler. In Kendale Lakes, the correct answer depends almost entirely on where on your property the fence goes. A south-facing vinyl fence on a small CBS lot with zero shade will visibly gap at panel joints on a July afternoon in ways an aluminum fence on the identical run won’t. Call (844) 834-8961 for a free, line-item estimate on both materials for your specific lot.
Vinyl vs aluminum fence in Kendale Lakes, FL: it depends on which side of your house you’re fencing
Kendale Lakes is a built-out 1970s and 1980s planned subdivision west of the Turnpike, full of concrete-block tract homes on small lots. There are no vacant parcels, so a fence here almost always runs tight against an existing structure, a pool cage, or a neighbor’s line. That geometry matters more than the catalog. On a compact lot, the same 40-foot run can sit in full afternoon sun on one side of the house and dappled shade on the other. Vinyl and aluminum age very differently under those two conditions, and that’s the honest starting point for any comparison.


What to look for when you compare vinyl and aluminum in South Florida
Most comparisons stop at looks and sticker price. In Miami-Dade, you should also weigh heat movement, wind rating, and how each material behaves after five or six hurricane seasons. Here’s the framework we use with homeowners:
- Thermal movement. How much does the material expand and contract between a cool morning and a hot afternoon? The material that moves less is easier to install correctly and stays tight longer.
- Sun exposure on your specific run. Surface temperature on a dark vinyl panel in direct July sun can climb well past 110°F while the shaded side of the same property stays near air temperature. That gap drives the whole decision.
- HVHZ wind rating. Both materials can meet Miami-Dade’s High Velocity Hurricane Zone standards, but only when the posts, footings, and fasteners are spec’d for it. A pretty panel on an under-built post is the failure point, not the panel.
- HOA color rules. Kendale Lakes’ planned sections have architectural review. How each material holds its color, and whether it ever needs repainting, affects whether you’ll be back in front of the review committee later.
Does vinyl really expand in the Kendale Lakes heat?
Yes, and the numbers are worth knowing. Standard PVC expands roughly 3/8 inch per 10 feet for every 50°F rise in temperature. Picture a 40-foot south-facing vinyl run that sits near 70°F overnight and hits about 110°F at the panel surface by mid-afternoon. That’s a 40°F swing across four 10-foot sections, which works out to nearly 1.5 inches of total movement the installation has to absorb. Proper HVHZ-rated vinyl work accounts for it with expansion gaps at the ends and slip-fit brackets that let panels float. The common shortcut, rigid fasteners screwed tight to a fixed post, doesn’t. A vinyl fence installed that way in this climate will rack, bow, and gap at the joints within two hurricane seasons. Aluminum moves far less under the same sun, which is why it holds its lines on an exposed run.

Vinyl or aluminum: which material for which side of the property?
This is the decision rule that actually works in Kendale Lakes, and it’s specific to South Florida lot geometry:
| Property position | Recommended material | Why |
|---|---|---|
| South- and west-facing runs, direct sun, little shade | Aluminum | Lower expansion rate, holds tighter joints and brackets through years of thermal cycling |
| North- and east-facing runs | Vinyl | Moderated temperature swings, expansion stays within what proper installation handles |
| Under tree canopy or heavy afternoon shade | Vinyl | Shade reduces surface heat and slows the expansion cycle |
| Privacy along a neighbor line or pool area | Vinyl | Solid panels give full screening; aluminum is typically open-picket |
A single-property fence often needs both. We regularly quote a vinyl privacy run on the shaded side and aluminum where the sun hits hardest, because one material across the whole lot is the recommendation that fails. You can see how we handle the full scope on our Fence Installation page.
How does HOA color fit into the vinyl vs aluminum comparison?
It’s a real lifecycle factor in Kendale Lakes’ planned sections. Vinyl’s color goes all the way through the material, so it’s permanent and never needs touch-up approval. Aluminum gets its finish from a powder coat, which is durable but can be scratched and will eventually need repainting, and in an HOA community a repaint can trigger a fresh architectural review. If your section’s board is strict about color, that’s a point for vinyl. If your run is the one taking full sun, aluminum’s stability usually wins the trade. We walk you through both before you commit, so you’re choosing on the facts, not a salesperson’s margin.
What does a vinyl or aluminum fence cost in Kendale Lakes?
Vinyl fence installation typically runs $3,500-$9,000, and aluminum fence installation runs $4,000-$10,000 for a comparable residential run. The range depends mostly on linear footage, post count, gate hardware, and how the HVHZ footings are spec’d for your lot. Getting a line-item quote for both materials on your specific orientation is the only way to make an honest side-by-side call. The number you see is the number you pay, and the work is backed in writing.

Why get a same-lot, side-by-side quote instead of a catalog price?
Because the position rule above means a phone quote is guessing. When we measure your actual runs and note which sides face the sun, you get two real numbers you can compare, plus options like the $1,000 off projects over $10,000 and 0% financing for 18 months. Our technicians have up to 12 years of experience installing in Miami-Dade HVHZ conditions, and every project carries our 730-Day Done Right Promise. If it’s not done right, we make it right. Calls are answered by a live person, 24/7. Learn more on our home page, or go straight to Fence Installation in Kendale Lakes.
FAQs
Aluminum is better on south- and west-facing runs with direct sun, and vinyl is better on north- and east-facing runs or under shade. The right choice depends on which side of your property the fence sits on, not on one material being universally superior. Call (844) 834-8961 for a free quote on both for your lot.
Vinyl fence installation runs $3,500-$9,000 and aluminum runs $4,000-$10,000 for a comparable residential run. Your exact number depends on footage, posts, gates, and HVHZ footings. Call (844) 834-8961 for a free line-item estimate on each material.
A vinyl fence can gap at the joints if it’s installed with rigid fasteners and no room for expansion. Standard PVC moves about 3/8 inch per 10 feet for every 50°F rise, so a 40-foot sunny run needs nearly 1.5 inches of accommodation. Proper slip-fit brackets and expansion gaps prevent it; the shortcut doesn’t. Call us to have your run assessed.
Yes. We spec posts, footings, and fasteners to Miami-Dade’s High Velocity Hurricane Zone standards and factor in your HOA’s color review before work starts. The work is backed by our 730-Day Done Right Promise. Call (844) 834-8961 to get started.
If you’d rather have it looked at, Groundwork Construction Co. of Kendale Lakes offers a no-pressure assessment in Kendale Lakes - call (844) 834-8961 for a free estimate. We’ll measure both runs, quote vinyl and aluminum side by side, and let the sun decide.
Written by the team at Groundwork Construction Co. of Kendale Lakes, serving Kendale Lakes, FL.


