







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Kendale Lakes Homeowners Choose Master Halco Construction
Groundwork Construction Co. of Kendale Lakes provides independent Master Halco construction service in Kendale Lakes, FL, including repair and installation of Master Halco vinyl, aluminum, ornamental steel, and chain link fence systems, gate hardware, and the impact window work that goes alongside them. What makes our Master Halco work different is that we start from the product line itself: we match the correct series, alloy, coating class, and fastener package to the job instead of swapping in whatever is on hand. We are an independent service provider and are not affiliated with, authorized by, or endorsed by Master Halco. Call (844) 834-8961 to schedule a free estimate.
Why Trust Groundwork Construction Co. of Kendale Lakes for Your Master Halco Construction?

Fence hardware is unforgiving in South Florida. A gate that was fine in a dry climate will start to bind here after two wet seasons. Our technicians have up to 12 years of experience and have worked on enough Ridgeline, Regis, WoodBond, Grand Illusion, and ornamental steel installs to know which fittings hold and which ones fail quietly. That matters when you are matching a replacement panel to a run that was installed a decade ago, because the profile, post spacing, and rail height have to line up exactly.
We use OEM-compatible parts whenever the Master Halco profile is still in production. That preserves both warranty eligibility and fit. When a style has been discontinued, we will tell you plainly and recommend a quality aftermarket equivalent in the same alloy and coating class rather than forcing a mismatched part into your run.
Every Master Halco job we handle in Kendale Lakes is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. Calls are answered by a live person, 24/7. Our technicians are background-checked and arrive in uniform. You get upfront pricing with no surprises, so the number you see on the estimate is the number you pay.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Master Halco Construction Problems We Fix in Kendale Lakes
These are the failures we see most often on Master Halco systems across Kendale Lakes, and the reason each one happens.
- Powder-coat chalking and peeling on aluminum fence panels (Ridgeline and Regis). After 5 to 7 years of UV and salt exposure, the finish on aluminum panels starts to chalk and then peel at the edges and near the bottom rail. Kendale Lakes sits close enough to the coast that salt carried on the breeze accelerates the breakdown, and once the coat lifts, the aluminum underneath begins to oxidize.
- Gate sag and hinge-point elongation on ornamental steel gates. A sagging steel gate is almost always a foundation problem, not a gate problem. Undersized posts, or posts set without a proper concrete footing, let the hinge-side upright lean, and once it leans, the hinges elongate their mounting holes and the gate starts to drag.
- Vinyl fence post cracking at grade (WoodBond and Grand Illusion). Kendale Lakes has a high water table and heavy irrigation use, and that combination moves soil around the post collar. Vinyl posts crack at grade when the concrete collar shifts and water sits against the post wall through repeated wet cycles.
- Corrosion at cut ends and on fasteners for chain link and steel systems. The galvanized coating protects the tube until it’s cut, and the cut end has no protection at all. When standard zinc hardware is substituted for galvanized or stainless fasteners, those two points become where the rust cycle starts and spreads.
- Impact window openings that won’t accept new units cleanly after a fence or gate install. Homes in Kendale Lakes’ planned sections often tie design approval and opening protection together, and a fence or gate change can trigger HOA review that runs in parallel with impact-window retrofits. Sequencing both jobs together saves a second approval round.
Master Halco Parts & Our Repair-vs-Replace Approach

We don’t stock Master Halco parts locally, so every part is sourced for the specific job: we identify the series, verify the profile is still in production, and order OEM panels, gates, and hardware that match what you already have. That’s usually the right call for anything under warranty or anything where fit matters, like a Regis panel that has to line up with an existing run.
For styles that have been discontinued, a quality aftermarket equivalent in the same alloy and coating class is the honest choice. It fits, it performs, and it doesn’t require tearing out a sound fence.
Repair is the better decision when panels and posts are structurally sound. Full replacement is the smarter call when powder-coat failure or post rot has spread past 20% of the run – at that point you are paying to patch a fence that will keep failing. We will show you which side of that line your fence is on. Call (844) 834-8961 for a free estimate and we’ll put the numbers in writing.
Our Master Halco Service Process – Step by Step
- 1
Diagnosis. We identify the Master Halco series, check post footings, hinge points, coating condition, and whether the profile is still in production. On WoodBond and Grand Illusion runs, we also check the concrete collar at grade for movement.
- 2
Parts sourcing. OEM Master Halco replacement panels, gates, and hardware where available; quality aftermarket equivalents in the same alloy and coating class where the style has been discontinued.
- 3
Repair or install. Posts get reset with proper drainage gravel, fastener upgrades go to stainless where the corrosion cycle demands it, and gates get re-hung with adjustable hinges so they stay true through storm-cycle flex.
- 4
Test. Every gate gets swung, latched, and checked for square. Fence runs get pulled and post-set checked. Impact window units get verified for wind-load compliance against Miami-Dade HVHZ requirements.
- 5
Warranty. Every job is covered by our 730-Day Done Right Promise, documented in writing.
See the difference
Before
After
Before
After
Before
AfterMaster Halco Products We Service & Install in Kendale Lakes
We work across the Master Halco fence and gate families that show up on Kendale Lakes homes: aluminum fence in the Ridgeline and Regis series, vinyl fence in WoodBond and Grand Illusion, ornamental steel fence, and chain link in both galvanized and vinyl-coated versions. We also handle the gate hardware, hinge sets, post caps, and fastener packages that go with each system, plus the impact window installations that often get scheduled alongside a fence project. If your fence is a Master Halco product, we can identify the series and tell you what service it needs.
We Also Service These Brands
Groundwork Construction Co. of Kendale Lakes is a multi-brand builder, not a single-brand shop. Alongside Master Halco, we install and service KraftMaid cabinetry, Kohler fixtures, GAF roofing systems, and PGT impact windows. That means one contractor can handle the fence and the window retrofit on the same project, with consistent scheduling and one point of accountability from foundation to finish line.
FAQs – Master Halco Construction Service in Kendale Lakes

Is Groundwork Construction Co. of Kendale Lakes authorized by Master Halco? No. We are an independent service provider and are not affiliated with, authorized by, or endorsed by Master Halco. We work on Master Halco products as an independent contractor using OEM-compatible parts and our own technical experience.
Do you use genuine Master Halco/OEM parts? Yes, whenever the profile is still in production. We source OEM replacement panels, gates, and hardware to preserve fit and warranty eligibility. For discontinued styles, we recommend a quality aftermarket equivalent in the same alloy and coating class.
How long does Master Halco service take? Post resets and gate corrections on a standard residential run are usually a single-day job. Panel replacement and full-run installs depend on parts lead time and HOA approval steps, which can add time in Kendale Lakes’ planned sections. Call (844) 834-8961 for a project-specific timeline.
What Master Halco models/series do you cover? Aluminum fence in Ridgeline and Regis, vinyl fence in WoodBond and Grand Illusion, ornamental steel fence, and chain link in galvanized and vinyl-coated versions. Gate hardware, hinges, and fastener packages are included with each.
Will service void my Master Halco warranty? Using OEM-compatible parts and correct installation practices is the warranty-safe approach, and that’s what we do. We’ll flag any situation where a repair method could affect a manufacturer warranty before work starts.
How much does Master Halco construction cost in Kendale Lakes? Here are the ranges we work from, and they’re consistent across every project we quote.
| Service | Typical Cost Range in Kendale Lakes |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Paver Patio Installation | $3,500 – $11,000 |
Call (844) 834-8961 for an exact quote. Estimates are free, and you’ll get a written line-item breakdown before any work begins.
Book Your Master Halco Service in Kendale Lakes, FL
Whether your WoodBond posts are cracking at grade, your ornamental gate is dragging, or you’re planning a full aluminum fence install, Groundwork Construction Co. of Kendale Lakes can diagnose it, source the right parts, and get it built to last and backed in writing. Our technicians are background-checked and arrive in uniform. Call (844) 834-8961 to schedule your free estimate and design consult.
Written by the team at Groundwork Construction Co. of Kendale Lakes.












