







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Glenvar Heights, FL: What It Costs and How Long It Takes
Asphalt driveways & resurfacing in Glenvar Heights typically run $3,500 to $9,000 for a new asphalt drive and $250 to $700 for a reseal coat, with most full driveway paving jobs finished in two to four working days once the base is ready. Resurfacing an existing drive (a new wearing course over sound asphalt) is faster, often a single long day plus cure time. Call (844) 834-8961 for a free on-site estimate with a written line-item quote, and we’ll tell you straight whether your drive needs a resurface or a full rebuild.
How asphalt paving actually goes, stage by stage

Asphalt isn’t poured like concrete. It’s placed hot, compacted in lifts, and it either lasts 20 years or fails in three depending on what happens before the first scoop of mix hits the ground. Here’s the real sequence we work through in Glenvar Heights.
Stage 1: Site walk and base assessment (day 1, about an hour)
We measure the drive, check the slope for drainage, and probe the existing base. On this ridge, that assessment matters more than usual – if the subgrade is sitting on shallow limestone, water sheds fast, but if a previous owner buried organic fill or old concrete rubble, that’s a soft spot that will telegraph through new asphalt within two seasons. You decide here whether we’re resurfacing or doing a full-depth rebuild.
Stage 2: Demolition and excavation (day 1 into day 2)
For a rebuild, we break out the old surface and excavate to a stable subgrade, then haul off debris. This is the stage where Glenvar Heights jobs can surprise: crews working along the 33143 corridor routinely hit limestone close to grade, so rock breaking with a hoe-ram is sometimes part of the budget before we ever lay base. You’ll see that line item in the quote, not on the invoice as a surprise.
Stage 3: Grading, base, and compaction (day 2 into day 3)
We shape the subgrade for positive drainage away from the house, then place and compact the aggregate base in lifts. Base depth is the single biggest predictor of whether an asphalt driveway in Glenvar Heights stays flat through our wet summers. You approve the final grade and the drainage direction before any asphalt goes down.
Stage 4: Paving and rolling (day 3, usually a half day)
Hot mix goes down in one or two lifts, raked to grade, then rolled while it’s still workable. Edges get feathered and tacked. If we’re resurfacing rather than rebuilding, this is the whole job: clean the existing surface, fill cracks and seal them, apply a tack coat, then lay the new wearing course over the sound base. A crew won’t pave in standing water or during an active downpour, so summer afternoon storms can push the pour to the next dry morning.
Stage 5: Cure, strip, and walkthrough (days 4 through 30)
You can walk on the drive after a few hours and drive on it after 24 to 48 hours, but full cure and hardening takes about 30 days – keep heavy vehicles and point loads off it until then. We do a final walkthrough, show you the drainage line, and hand over your written workmanship warranty. Any touch-ups from cure settlement get handled under that warranty.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Asphalt isn’t one product. The choices below are the ones that matter for a Glenvar Heights drive, with the honest trade-off on each.
- Full rebuild vs. resurface. A rebuild excavates to a stable base and installs fresh asphalt top to bottom – $5,000 to $14,000 in replacement terms, longer life. A resurface lays new asphalt over sound existing pavement for far less, but only works if the base is intact and cracks aren’t reflecting through. If your drive has alligator cracking or sunken areas, a resurface just buys you a year.
- Base thickness and aggregate type. A thicker compacted stone base costs more up front but is the difference between a drive that holds under our downpours and one that shifts. This is where cheap bids get thin.
- Asphalt mix grade. Standard surface mix is the default. A coarser, stiffer mix holds up better to intense summer sun and heavy vehicles; a finer mix looks smoother but wears faster under load.
- Drainage approach. Grading to shed water off the edges vs. adding a channel or French drain. On lots with a low side or where the drive meets a slope, drainage work is the difference between a driveway and a puddle.
- Finish and edging. Plain asphalt edges vs. a paver or concrete border that holds the edge and dress up the entry. Aesthetic, but the border also protects the edge from crumbling.
- Seal coating schedule. New asphalt wants to cure roughly six months before its first seal, then resealing every couple of years keeps it from drying out under Florida sun.
What Asphalt Driveways & Resurfacing costs in Glenvar Heights, FL

Here’s the honest number spread for this job in Glenvar Heights, before any variables:
| Item | Typical Range |
|---|---|
| New asphalt driveway paving | $3,500 – $9,000 |
| Full driveway replacement (excavate + rebuild) | $5,000 – $14,000 |
| Seal coating / reseal | $250 – $700 |
Four things push a job to the low or high end. Size is the obvious one – square footage drives material and labor. Existing condition matters more: a clean resurface lands at the bottom of the range, while a drive with failed base, tree roots, or old concrete to break out climbs fast. Rock and site access can add real money here, because Glenvar Heights sits on the pine-rock ridge and limestone is often close to grade. Material grade and drainage scope – base thickness, mix, and whether we’re adding drainage – moves the number too.
Every written estimate itemizes excavation, base, asphalt, haul-off, and drainage separately, so you can see exactly where the money goes. What’s typically not included: landscaping repair beyond the drive edges, utility relocations, and the optional paver or concrete border. Call (844) 834-8961 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Glenvar Heights homes specifically do to this job
Glenvar Heights (33143) sits on the pine-rock ridge just south of Coral Gables, and that geology shows up in every asphalt project here. New construction and additions routinely hit Miami-Dade’s oolitic limestone at shallow depth, so excavation for a driveway rebuild often means rock breaking and, on deep cuts, a hoe-ram where coastal-fill lots a few miles east would need nothing. That’s the single biggest local variable.
The housing stock explains the other half. Most of the ridge’s 1950s to 1970s single-story ranch and CBS block homes are being replaced or expanded into larger two-story custom infill – it’s a tear-down and rebuild market, not a tract-repair market. When the house goes up, the drive comes out with it, and new owners usually want the driveway resurfaced or rebuilt to match a larger footprint and a new drainage grade. The climate adds pressure: intense summer sun dries asphalt and heavy afternoon downpours sit on any grade that isn’t right, and with hurricane season running June through November, we plan schedules around rain delays and build to Miami-Dade’s High-Velocity Hurricane Zone requirements where they apply. When the wider project is part of a full Driveway & Pavers in Glenvar Heights scope, we sequence the asphalt work around the other trades so nothing gets paved over twice. We handle Glenvar Heights and the surrounding neighborhoods, and homeowners often pair a new drive with Chain Link Fence in Glenvar Heights or ADU Site Prep & Utilities in Glenvar Heights when they’re already moving dirt.
Serving Glenvar Heights, FL – Our Local Coverage Area
We serve Glenvar Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Asphalt Driveways & Resurfacing in Glenvar Heights

A full new asphalt driveway takes two to four working days once the base is ready, and a resurface over sound pavement is usually a single day plus cure. Add time if rock breaking is needed on the ridge or if summer storms push the pour. Call (844) 834-8961 for an exact schedule on your drive.
Many driveway resurfacing jobs don’t require a permit, but a full rebuild that changes the footprint, drainage, or approach to a right-of-way often does. We pull the permits and pass the inspections that apply to your project, so that’s on us to sort out, not you. Call (844) 834-8961 and we’ll confirm what your specific job needs.
It depends on the base. Resurfacing works when the existing asphalt is sound with only minor cracking; if there’s alligator cracking, sinking, or failed base, a resurface will mirror those defects within a season and a rebuild is the honest call. We assess the base during the free estimate and tell you which is right.
Seal coating and reseal run $250 to $700, while new asphalt paving runs $3,500 to $9,000 and a full replacement lands between $5,000 and $14,000. Size, existing condition, rock and drainage scope, and material grade move the number. Call (844) 834-8961 for an exact quote – estimates are free.
Our work is backed by the 730-Day Done Right Promise – if it isn’t done right, we make it right, one of the longest workmanship guarantees in the space. That’s in writing on every asphalt job. Call (844) 834-8961 to get your free estimate scheduled.
Get your asphalt driveway priced in Glenvar Heights
A free on-site estimate starts with a call to (844) 834-8961. A live person answers, day or night, and we’ll set a time to walk your drive, probe the base, and put an itemized number in writing – upfront pricing, no surprises. If you’re weighing asphalt against other surfaces, our Driveway & Pavers service lays out the full picture. Built to last, backed in writing.
Written by the team at Groundwork Construction Co.












