







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterStanding Seam Metal Roof Cost in Kendale Lakes, FL: What It Really Runs on a CBS Home
Standing seam metal on a Kendale Lakes CBS home runs $15,000 to $40,000, and that’s higher than the numbers you’ll see in national cost guides because of the roof, not the metal. Most 1970s and 1980s tract homes here were built with flat or low-pitch decks, parapet walls on every side, and three or more HVAC curbs punching through the roof. That geometry means custom pan lengths, mechanically fastened cap flashing, and penetration work that a steep-slope price list never accounts for. Call (844) 834-8961 for a free estimate and an upfront number you can hold us to.


Why Standing Seam Costs More Here Than the National Average
Standing seam sounds simple until you stand on a 1979 Kendale Lakes roof and count the obstacles. A standard install assumes a clean gable roof at a steep pitch. What we actually find on these homes is a lot different.
- Low slope and flat decks (1:12 to 3:12). Standing seam needs a minimum half-inch-per-foot slope, and these roofs often fall short. That means a self-adhering high-temperature underlayment rated for standing water under the panels – a line item missing from most online pricing guides.
- Parapet walls on CBS construction. Flashing has to be mechanically fastened and counter-flashed into the block, not just tucked behind stucco. That takes time and material.
- HVAC curbs and pipe boots. A Kendale Lakes home with three curbs and a handful of vents needs custom curb caps and correct boot detailing on every penetration.
- HVHZ compliance. Panels used on Miami-Dade jobs must carry a Product Approval (NOA) for the specific gauge and clip spacing. Lighter 26-gauge panels from big-box sources frequently don’t qualify.
This is renovation work on a fully built-out subdivision, not new construction. Kendale Lakes homes sit at the pre- to post-Andrew code transition, so decking, straps, and roof-to-wall connections often need attention even during a straightforward re-roof. HOA architectural review in the planned sections can add approval steps before we ever start. None of that shows up in a national average – but it shows up in your quote, and we’d rather price it honestly up front than surprise you mid-job.
What We Look At Before We Quote a Standing Seam Roof
We treat the estimate like a walkthrough. Here’s what drives the number, and what to ask any contractor quoting standing seam in Kendale Lakes.
Panel gauge and product approval
We specify panel systems that carry the right Miami-Dade NOA for the gauge and clip spacing your roof needs. If a contractor can’t show you the NOA matching the panel they’re proposing, the roof may not pass inspection. We use a narrow set of verified systems and we’ll walk you through the documentation.
Flashing detail at the parapet
Stucco-over-flashing shortcuts fail. In our experience along these CBS homes, that shortcut shows its first leaks within two hurricane seasons – wind-driven rain finds the seam where stucco sits over an unfastened edge. Proper cap flashing is counter-flashed into the block and fastened so the wall and roof move together. This detail alone can add real dollars to a Kendale Lakes quote, and it’s the one detail a cheap bid always skips.
Penetration work
Here’s an operator fact most cost guides miss: on standing seam roofs in South Florida, the leaks we get called back for almost always start at penetrations, not panel seams. The seam itself is reliable. The HVAC curb cap, the pipe boot, the vent collar – those are where water gets in. That’s a separate skill set from laying panels, and it’s worth asking who does it.

Standing Seam Metal Roof Cost Breakdown for Kendale Lakes
Here’s how the ranges break down. These are market-calibrated for the Kendale Lakes area, and your exact number depends on roof size, geometry, and how much penetration and flashing work your home needs.

| Item | Cost Range |
|---|---|
| Standing seam metal roof installation (full) | $15,000 – $40,000 |
| Full roof replacement (comparable scope, other systems) | $8,000 – $20,000 |
| Roof repair (seam, flashing, penetration patch) | $400 – $1,800 |
| Tile roof repair (existing roof before conversion) | $600 – $2,500 |
Where your Kendale Lakes roof lands in that $15,000 to $40,000 band comes down to square footage, how many penetrations need custom detailing, how much parapet flashing runs the perimeter, and whether the deck needs repair underneath. We give you an upfront number – the number you see is the number you pay. No-hassle pricing, backed in writing.
Built to Last, Backed in Writing
Most roofing labor warranties on metal run a year. Ours runs longer, and it covers the parts that actually fail. The 730-Day Done Right Promise specifically covers panel seaming and flashing integrity – so if a penetration or a seam lets water in during that window, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it exists because we build the details correctly the first time.
Our technicians have up to 12 years of experience, arrive in uniform, and are background-checked. Groundwork Construction Co. of Kendale Lakes works with top-tier material partners including GAF, Owens Corning, and Andersen for the windows and doors that often pair with a re-roof. We help homeowners inspect and replace their roofing systems across Kendale Lakes and the surrounding area, from flat decks to standing seam and everything in between.
Because these homes were built at the code transition, we also look at roof decking and tie-downs while we’re up there. If the deck needs repair under the new panels, we’d rather flag it at estimate time than uncover it after the panels are ordered. That’s the difference between a quote and a plan.
FAQs
A standing seam metal roof in Kendale Lakes typically costs $15,000 to $40,000 for a full installation. The range depends on square footage, slope, parapet flashing length, and how many HVAC curbs and penetrations need custom detailing. Call (844) 834-8961 for a free estimate – we’ll put a firm number in writing.
Repair is cheaper if the panels and underlayment are sound and the problem is isolated – typically a flashing or penetration issue between $400 and $1,800. Once the underlayment is compromised or leaks are spreading, replacement usually makes better financial sense than repeated patches. We’ll tell you honestly which side of that line your roof is on after a walkthrough.
Yes, but it needs proper detailing. Low-slope decks require either the minimum half-inch-per-foot slope or a self-adhering high-temperature underlayment rated for standing water, and parapets need mechanically fastened cap flashing counter-flashed into the block. That’s exactly the kind of job common on Kendale Lakes CBS homes, and it’s priced into our quotes rather than discovered later.
It does when the panel system carries a Miami-Dade NOA for the specific gauge and clip spacing used on your roof. Lighter 26-gauge panels from big-box suppliers often don’t qualify. We only propose panel systems with the correct product approvals, and we’ll show you the documentation before work begins.
Get a Standing Seam Roof Priced Right
Standing seam on a Kendale Lakes CBS home is a specialized install, and it deserves a quote that reflects the real work. We answer live 24/7, give upfront pricing, and back every job with the 730-Day Done Right Promise. Call (844) 834-8961 today to book your free estimate and design consult. Then visit our Kendale Lakes service area page to see everything we handle from foundation to finish line.
Written by the team at Groundwork Construction Co. of Kendale Lakes, serving Kendale Lakes, FL.
What Our Customers Say
"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson












