







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterMetal Roofing in Kendale Lakes, FL
Metal roofing in Kendale Lakes is a long-term roof replacement that uses steel, aluminum, or stone-coated steel panels instead of asphalt shingles, and it typically costs $19,000 to $42,000 for a full residential roof here depending on panel type and roof complexity. Homeowners choose it because a properly installed metal roof handles South Florida’s sun, wind-driven rain, and hurricane-season gusts far better than asphalt, and it can last two to three times as long. Groundwork Construction Co. of Kendale Lakes installs metal roofing across the western suburbs, backed by our 730-Day Done Right Promise and a single number you’ll pay from the first estimate to the final walkthrough. Call (844) 834-8961 and a live person answers, day or night.
We treat metal like what it is: an engineered building envelope, not a cosmetic upgrade. The panels are the visible part, but the underlayment, fastening pattern, and flashing details decide whether the roof survives the first serious storm or fails at a seam. That’s the difference between a roof that lasts and one you’re calling someone about in year four. Our work sits under our parent Roofing service, and metal is one of the categories where the material brand you choose matters most. We install systems from GAF and CertainTeed alongside the fasteners and trim that hold them down, so the whole assembly comes from partners we trust, not whatever a supply house had in stock.
Kendale Lakes sits in a pocket of Miami-Dade where afternoon thunderstorms roll in most of the summer and the sun bakes a roof surface hotter than the air temperature ever gets. Metal handles both better than shingle. It sheds water fast, reflects radiant heat when you choose a cool-rated finish, and doesn’t grow the algae streaks that turn so many asphalt roofs here a streaky gray within a few years.

When You Need Metal Roofing
Metal makes sense for some roofs and not others. Here are the situations where we tell Kendale Lakes homeowners it’s the right call, and a few where a repair or a different material might serve you better.
- Your asphalt roof is near the end of its life. If your shingle roof is 18 to 22 years old and you’re patching it every storm season, the math on metal starts to favor replacement. One install, decades of service, fewer calls to a roofer.
- You’ve had repeat wind damage. Homes near the open stretches toward the Tamiami Canal and the larger lakes catch gusts that lift and tear shingles. Metal panels fastened to spec hold up to that loading pattern far better than individual tabs.
- You want to cut cooling costs. A cool-rated metal roof reflects solar heat instead of absorbing it. In a Kendale Lakes summer, that can show up on your power bill, especially on a low-slope or west-facing roof that takes the afternoon sun.
- You’re tired of algae and mildew streaks. The humidity here feeds the algae that stain asphalt shingles. Metal finishes resist it, which keeps the roof looking the way it did the year it went on.
- You’re adding solar or planning to. Metal standing-seam roofs are a clean mounting surface for panels, and the roof outlasts the solar array, so you’re not paying to remove and reinstall panels when the roof fails underneath.
- You have a low-slope section or an addition with tricky geometry. Standing-seam metal handles pitches and transitions that shingle does poorly, which matters on the many Kendale Lakes homes with a flat-roof carport or a later addition tied into the main roof.
If you’re not sure which way to go, that’s exactly what the free estimate is for. We look at your roof, your pitch, your budget, and how long you plan to stay, then tell you straight whether metal is worth it for your house or whether a repair makes more sense right now.
Our Metal Roofing Process
A metal roof is only as good as the layers under it. Here’s how we run a metal install in Kendale Lakes, from the first inspection to the final walkthrough.
- On-site inspection and honest assessment. We get on the roof, check the decking, the existing underlayment, the flashing around chimneys and vents, and the condition of the fascia. If the deck needs repair or the structure needs attention before metal goes on, you’ll know before we quote, not after we open it up.
- Material selection and a written, upfront price. You choose the panel profile and finish, and we walk you through how each one performs here. We put the number in writing. The price you see is the price you pay, and projects over $10,000 get $1,000 off. We also offer 0% financing for 18 months so a full metal roof doesn’t have to come out of savings in one hit.
- Prep and tear-off. The old roof comes off, the deck gets inspected and repaired where needed, and we install a high-temperature underlayment rated for metal. This step is where cut-rate installs cut corners, and it’s where leaks start two storm seasons later.
- Panel install with proper fastening. Panels go down to the manufacturer’s fastening pattern, with the correct clips, screws, and closures for our wind zone. Standing-seam panels get the concealed-fastener treatment; exposed-fastener panels get the washered screws torqued to spec so they don’t back out in the heat.
- Flashing, trim, and ridge details. Ridges, valleys, penetrations, and the transition where metal meets a flat-roof section are finished with matching trim and sealant. Water gets in at the edges and transitions, never the field of the panel.
- Final walkthrough and the 730-Day Done Right Promise. We walk the roof with you, show you what we installed, and hand over the paperwork. If anything we installed isn’t right in the next two years, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing.
Most metal roofs are a multi-day project, not a single-visit job, so we schedule around the weather and keep you informed on timing. Our technicians have up to 12 years of experience, arrive in uniform, and are background-checked before they set foot on your property. No unmarked vans, no crew you’ve never met.

Metal Roofing Pricing in Kendale Lakes
A metal roof in Kendale Lakes runs roughly $19,000 to $42,000 for a typical single-family home, with most jobs landing in the mid-$20,000s to low-$30,000s. The range is wide because panel type, roof pitch, square footage, and how much flashing and trim the job needs all move the number. Here’s how the line items break down so you can see where your money goes.
| Line Item | Typical Range | What Moves It |
|---|---|---|
| Standing-seam steel (installed) | $26,000 – $42,000 | Square footage, roof pitch, number of panels and seams |
| Exposed-fastener metal panels (installed) | $19,000 – $30,000 | Panel gauge, roof complexity, slope |
| Stone-coated steel (installed) | $24,000 – $38,000 | Profile style, color, underlayment upgrade |
| Underlayment and decking repair | $1,500 – $4,500 | Condition of the existing deck, square footage replaced |
| Flashing and trim package | $1,200 – $3,000 | Number of valleys, penetrations, and flat-roof tie-ins |
| Old roof tear-off and disposal | $1,000 – $3,500 | Number of existing layers, accessibility |
What drives the final number more than anything is roof geometry. A simple gable roof costs less than a hip-and-valley design with two dormers. A roof over a carport that ties into a low-slope section costs more because the transition detail takes time and material. Panel type matters too: standing-seam with concealed fasteners is the premium choice and the most durable, while exposed-fastener panels cost less and perform well on simpler roofs.
We don’t quote a teaser number and then find “extras.” Upfront pricing means the estimate you sign is the estimate you pay. If we find a surprise once the old roof is off, we stop and show you what we found before we do anything else. And on top of the line-item price, projects over $10,000 get $1,000 off, and you can spread the cost with 0% financing for 18 months. Call (844) 834-8961 for a free estimate and design consultation. There’s no charge and no obligation, and estimates are free.
Why Metal Beats Shingle Here in Kendale Lakes
A lot of homes in this part of Miami-Dade still wear asphalt shingles because that’s what went on when they were built. That doesn’t mean it’s the best roof for the climate now. Metal costs more on day one and wins on most other measures over a 30-year horizon.
Life expectancy is the biggest factor. A well-installed metal roof can serve 40 to 50 years. Asphalt shingle typically lasts 18 to 22 in South Florida before the heat and sun chase it toward failure, and the humidity and algae speed that up. That means a shingle roof often gets replaced twice in the life of one metal roof. Factor in the second install, the disruption, and the rising cost of materials, and metal closes the gap on total cost of ownership.
Wind performance matters here too. Miami-Dade has strict wind-loading requirements, and metal systems fastened to spec pass them more consistently than individual shingles that rely on adhesive strips and overlapping tabs. When a squall line pushes through from the Everglades in summer, you want a roof that was engineered for the load, not one hoping the tabs hold.
And then there’s the heat. Metal with a cool-rated finish reflects solar radiation instead of soaking it up. On a west-facing roof in Kendale Lakes, that difference is real, and it helps the attic stay cooler, which eases the load on your AC. Our brand partners for metal systems include GAF and CertainTeed, both of which carry product lines rated for our wind zone and climate.
Metal Roofing vs. Other Roofing Options
Homeowners ask us constantly whether metal is worth the premium over shingle, tile, or flat-roof systems. The honest answer depends on what you care about: up-front cost, lifespan, or long-term maintenance. Here’s how it stacks up.
- Metal vs. asphalt shingle. Shingle costs less to install, roughly $9,000 to $18,000 for a Kendale Lakes roof, but lasts about half as long and needs more frequent attention. Metal costs more up front and wins on lifespan and wind resistance.
- Metal vs. concrete tile. Tile is common on South Florida homes and lasts well, but it’s heavy and brittle, and a cracked tile after a storm means a repair. Metal is lighter and holds up to impact better on most profiles.
- Metal vs. flat-roof membrane. On a truly low-slope section, membrane systems like TPO or modified bitumen are often the right tool. A good metal install knows when to transition to membrane at the flat, and we handle that detail.
We’re not going to sell metal to someone whose roof geometry doesn’t suit it. If a repair, a shingle replacement, or a membrane section is the smarter move for your house, we’ll say so. That’s what upfront pricing and a straight answer look like.
What Metal Roofing Handles That Shingles Don’t
The roofs we see in Kendale Lakes take a specific beating. Roof decks sit at near-waist height on many of the ranch and single-story homes here, which means the panels get more radiant heat from the surrounding concrete and less airflow than a taller roof would. That drives surface temperatures up and stress-tests every material choice.
Metal handles that. Standing-seam panels expand and contract with temperature, and the concealed fasteners allow for that movement without backing out. Exposed-fastener panels get washered screws torqued to spec so the rubber seals don’t split in the heat. Underlayment rated for high temperature sits between the panel and the deck so the heat doesn’t cook the layer below.
The other thing metal handles is rain volume. Kendale Lakes gets more than 60 inches of rain in a typical year, and most of it falls in intense summer bursts. Metal sheds water fast, and the roof-to-wall and roof-to-flat transitions are where we spend the most time. Water intrusion on a metal roof almost never starts in the middle of a panel; it starts where the metal meets something else. That’s why the flashing and trim details in our process get the attention they do.
If you’re comparing contractors, ask each one how they handle the transition between the metal and any flat section on your roof. The answer tells you whether they’ve done this in our climate or just watched a video.
Trust Signals You Can Check
We know the fear: a contractor who quotes low, disappears, and leaves you chasing a warranty that turns out to be a piece of paper. Here’s what we put in writing so you don’t have to take our word for it.
- 730-Day Done Right Promise. If the work isn’t right within two years, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s not conditional fine print. Built to last, backed in writing.
- Live person, 24/7. Call (844) 834-8961 any hour and a person answers. No voicemail, no waiting until Monday. When storm damage hits at night, you reach someone.
- Background-checked, uniformed technicians. Every tech is verified and arrives in a uniform. No unmarked vans, no strangers.
- Upfront pricing, no surprises. The number you see on the estimate is the number you pay.
- A curated brand portfolio. We work with GAF, CertainTeed, and other top-tier partners across every trade, so you choose quality, not just what’s on the shelf.
You can also see what we do across the broader Kendale Lakes service area and how metal fits into our full-scope approach from foundation to finish line.
FAQs – Metal Roofing
How much does metal roofing cost in Kendale Lakes?
Metal roofing in Kendale Lakes typically costs $19,000 to $42,000 for a full residential roof, with most homes landing in the mid-$20,000s to low-$30,000s depending on panel type, roof pitch, and complexity. Standing-seam is at the top of the range, exposed-fastener panels near the bottom. We give you a written, upfront price before any work starts, and projects over $10,000 get $1,000 off plus 0% financing for 18 months. Call (844) 834-8961 for an exact quote; estimates are free.
How long does a metal roof last in South Florida?
A well-installed metal roof can last 40 to 50 years in South Florida’s heat, sun, and storm climate, roughly double the life of asphalt shingle. The underlayment and fastening details do most of the work in getting you there, which is why we don’t cut corners on either. Our 730-Day Done Right Promise covers workmanship, so if anything we installed isn’t right, we make it right. Call (844) 834-8961 to talk through your roof.
Can you install metal roofing over my existing roof?
In most cases, no; we recommend a full tear-off so we can inspect and repair the deck before the new metal goes on. Installing metal over an old roof traps problems underneath and shortens the life of the new system. Tear-off and disposal usually run $1,000 to $3,500 depending on the number of layers and accessibility. We’ll tell you honestly what your roof needs after an on-site inspection. Call (844) 834-8961 to schedule a free estimate.
Is metal roofing better than shingle for a Kendale Lakes home?
For most Kendale Lakes homeowners planning to stay in the home long term, yes. Metal lasts about twice as long, holds up better to wind-driven rain and storm gusts, and reflects heat instead of absorbing it, which helps with cooling costs. Shingle costs less up front. If you’re moving within a few years or your budget is tight right now, shingle or a repair may make more sense, and we’ll tell you that. Call (844) 834-8961 for a straight answer on your roof; estimates are free.
Get a Metal Roofing Estimate in Kendale Lakes
Metal roofing is a big decision, and you deserve a contractor who puts the price, the timeline, and the guarantee in writing before the first panel comes off the truck. Groundwork Construction Co. of Kendale Lakes brings the 730-Day Done Right Promise, upfront pricing with no surprises, live people answering the phone around the clock, and background-checked, uniformed technicians to every job. Our technicians have up to 12 years of experience with metal systems. If you’re ready to see what a metal roof costs for your home, call (844) 834-8961 for a free estimate and design consultation. If your roof has storm damage and needs attention now, the line is answered 24/7, so call anytime.
Written by the team at Groundwork Construction Co. of Kendale Lakes, serving Kendale Lakes.


