







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Kendale Lakes: What You’re Actually Getting
A paver driveway in Kendale Lakes runs $7,000 to $18,000 for a typical 400 to 600 square foot two-car apron, and most jobs finish in three to five working days once the base is set. You get a base prep, a compacted aggregate layer, edge restraint, the pavers themselves, and polymeric sand in the joints. Call (844) 834-8961 for a free on-site estimate and a written line-item quote before we touch the existing slab. No-hassle upfront pricing means the number you see is the number you pay.
Day One, Day Three, Day Five: How a Paver Driveway Goes In

Pavers aren’t a once-and-done pour. The job is base work, and the decorative part on top comes last. Here’s the honest sequence we use in Kendale Lakes.
Stage 1: Site walk and demolition (day 1)
We start by checking what’s under the current surface. On most of the 1970s and 80s tract homes here, that means breaking out a cracked concrete slab or an old asphalt layer. Demo on a standard single-car-width apron takes about half a day. If the slab is sound and drains properly, we may be able to leave it and build over, which saves you money. You decide at this stage whether to keep the existing concrete as a base or remove it entirely.
Stage 2: Excavation and grading (day 1 to 2)
We dig the base course to the right depth for South Florida’s sun and storm runoff. Grading is the decision point you’ll want to sit in on. A paver driveway has to pitch water toward the street or a drainage swale, never toward your garage door. Because the lots in Kendale Lakes are small and fully built out, we’re usually working with a tight tolerance between the house and the right-of-way line. A poor grade here causes ponding and joint sand loss for years.
Stage 3: Aggregate base and compaction (day 2 to 3)
We lay and compact the aggregate in lifts, not all at once. This is what keeps a paver driveway from rutting under a loaded truck. Compaction is checked lift by lift. You don’t need to be on-site for this, but we’ll walk you through the material spec before we start so you know what’s under your pavers.
Stage 4: Paver installation and edge restraint (day 3 to 4)
Pavers go down in the pattern you chose, with a locking edge restraint holding the border. The edge is what stops the whole field from spreading at the driveway apron, and it’s the first thing that fails on a cheap install. You choose the pattern and color before this stage, not during it.
Stage 5: Sand, cleanup, and walkthrough (day 4 to 5)
We sweep polymeric sand into the joints, activate it, and give the driveway a final wash. Then we walk it with you. Drive it after 24 hours, not sooner. Our 730-Day Done Right Promise covers workmanship on the install, and if something isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for a Paver Driveway
The material and pattern choices are where homeowners get stuck, so here’s what actually matters in this climate.
- Concrete pavers vs. clay brick: Concrete pavers are the workhorse for a South Florida driveway. They hold up to sun, heavy rain, and typical vehicle loads. Clay brick is beautiful and more expensive, but it chipping and color-fastness are more variable. Concrete pavers in a tumbled or non-tumbled finish are the practical pick for most Kendale Lakes homes.
- Thickness: 60mm pavers are the standard for residential driveways. Anything thinner is a walkway paver and will crack or shift under a car.
- Pattern: Herringbone and running bond are the strongest interlocking patterns and the least likely to shift at the edge. Basketweave and stack bond look great but need a solid base and edge restraint.
- Color and finish: Many pavers ship in blends that hide tire marks and staining better than a single solid color. Ask about color-fastness, especially on west and south-facing aprons that get the most sun.
- Sealer or no sealer: Sealing isn’t required, but it slows fading and helps joint sand stay put through the rainy season. It’s an add-on, not a required step, and we’ll tell you honestly whether your install needs it.
- Drainage add-ons: On a fully built-out lot, you may need a channel drain or a pop-up emitter at the apron. That’s a real cost to plan for, not a surprise we spring later.
What Paver Driveways Cost in Kendale Lakes, FL

Most paver driveway installs in Kendale Lakes land between $7,000 and $18,000. Here’s how the number breaks down and what pushes a job toward the top of that range.
| Line item | Typical range |
|---|---|
| Paver driveway installation (400 – 600 sq ft) | $7,000 – $18,000 |
| Demo and haul-off of existing surface | Typically bundled, adds to labor |
| Drainage addition (channel drain, emitter) | Quoted separately when needed |
| Sealing after install | Optional add-on |
What moves you to the low end: a sound existing slab we can build over, a straightforward rectangle with easy street access, and standard 60mm concrete pavers in a common color. What pushes you to the high end: full demolition of a settled or cracked slab, a curved or tight geometry that limits machine access, upgraded or imported pavers, adding drainage, and any grading correction needed to keep water away from the house. In a fully developed section of Kendale Lakes, tight lot lines and HOA architectural review can also add time and cost. A written estimate will list labor, base material, pavers, edge restraint, and sand separately. It typically won’t include unforeseen slab replacement or drainage work until we see it in person, which is why the free on-site estimate matters.
See the difference
Before
After
Before
After
Before
AfterWhat Kendale Lakes Homes Specifically Do to This Job
Kendale Lakes is a large, build-out planned subdivision from the 1970s and 80s west of the Turnpike. Almost every driveway we touch belongs to a concrete-block, stucco, one- or two-story tract home on a small, fully developed lot, and most were built to pre-Andrew or early-Andrew standards. That matters for pavers. The existing slab under your driveway has had forty years of subtropical sun, heavy summer thunderstorms, and hurricane-season rain. We regularly see cracked, settled, or heaved concrete at the apron and along the garage door threshold, plus poor original grading that lets water pond near the foundation. A paver driveway is often the fix, but only if the base is rebuilt, not just covered. Miami-Dade’s High Velocity Hurricane Zone code governs the structural side, and any HOA architectural review in the planned sections can add an approval step before we break ground. If the project grows into a full front-of-house refresh, homeowners often pair the driveway with Door Installation in Kendale Lakes or a Cabinets & Countertops in Kendale Lakes update, and we can handle all of it as one project. We cover the whole of Kendale Lakes and the surrounding communities. For the wider project scope, see our Driveway & Pavers in Kendale Lakes page, or browse the full Driveway & Pavers service.
Serving Kendale Lakes, FL – Our Local Coverage Area
We serve Kendale Lakes and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Kendale Lakes

A standard paver driveway usually takes three to five working days, with the base prep and compaction eating most of that time. Weather can add a day, and adding drainage or demo of a thick slab can push it to a week. Call (844) 834-8961 for a timeline matched to your lot.
Permit requirements depend on the scope and whether we’re altering the existing slab, drainage, or right-of-way approach. Miami-Dade reviews the structural side under HVHZ rules, and HOA approvals run separately in the planned sections. We confirm exactly what your project needs and pull the required permits before work starts.
Yes, if the existing slab is sound, stable, and draining properly. If it’s cracked, settled, or holding water, building over it just transfers the failure into your new pavers. We’ll check it on the estimate and tell you straight whether it can stay.
Most installs land between $7,000 and $18,000 depending on size, base condition, paver grade, and drainage. Call (844) 834-8961 for an exact quote with a written line-item breakdown and no change-order surprises.
Workmanship on your paver driveway is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Paver manufacturers also carry their own product warranties, and we’ll walk you through which applies to what.
Get a Free Paver Driveway Estimate in Kendale Lakes
Call (844) 834-8961 to schedule your free on-site estimate for paver driveways in Kendale Lakes. A live person answers around the clock. We’ll walk your driveway, check the base and grade, and hand you a written line-item quote with no surprises. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off. Built to last, backed in writing.
Written by the team at Groundwork Construction Co.












