







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterNew Construction vs. Replacement Windows in Kendale Lakes, FL: Choose Based on the Block Buck, Not the Catalog
Choose replacement (insert) windows if the concrete block buck around your original opening is intact and plumb; choose new-construction (fin) windows only when that buck has been verified sound or rebuilt, because in Kendale Lakes’ CBS homes the attachment substrate - not your preference - decides which method Miami-Dade’s High Velocity Hurricane Zone code will actually approve. In a 1975 concrete-block house off SW 147th Avenue, the real question isn’t which window looks better. It’s what the stucco and block behind it will hold. Call (844) 834-8961 and we’ll tell you which side of that line your house falls on.

Most window comparisons you’ll read online treat flange-versus-insert as a style choice. It isn’t. It’s a structural and code question, and here it runs through 1970s-era construction that was never designed with modern impact ratings in mind. Groundwork Construction Co. of Kendale Lakes has spent enough afternoons chipping stucco off these openings to know the answer lives in the wall, not the showroom.

What Actually Separates New-Construction Windows From Replacement Windows Here
A new-construction window, sometimes called a fin or flange window, has a perimeter flange that nails or screws to the rough-opening framing, then gets sealed and covered by stucco, siding or flashing. Because the flange integrates with the weather barrier, it delivers the best continuous water management - when the substrate is solid. A replacement or insert window sets inside the existing frame without disturbing interior or exterior finishes, and its narrower attachment footprint bears on the existing opening.
That narrower footprint is exactly why the standard advice breaks down in Kendale Lakes. In a CBS block home, the original 1970s window was set into a continuous concrete or block buck. If that buck is sound, both methods can work. If it’s cracked, spalled or water-saturated, a fin window’s flange has nothing reliable to grab - and the compliant move is often the insert, because it doesn’t depend on a substrate that’s already failing. That’s the counterintuitive part competitors skip: the “better” method isn’t better if the wall can’t support it.
- Fin (new-construction): Best water management, requires continuous attachment to a verified rough-opening substrate and a valid Notice of Acceptance (NOA) for that exact attachment method.
- Insert (replacement): Preserves interior and exterior finishes, narrower attachment footprint, can be the stronger compliant choice when the block buck is compromised.
- Both: Must carry an HVHZ product approval and match the opening condition we document before ordering.
Why the 1970s Kendale Lakes Housing Stock Complicates the Choice
Kendale Lakes is a build-out 1970s and 80s planned subdivision west of the Turnpike, so nearly every window job here is a retrofit on an aging concrete-block tract home - there are no vacant lots to build fresh on. That means we’re almost always working around original construction, and the original construction is where the surprises live.
Many of these homes have galvanized steel sub-frames around the original window openings. Four-plus decades of South Florida humidity and wind-driven rain has surface-corroded that steel, and corroded steel expands. When it expands, it cracks the surrounding stucco and can distort the opening itself. You can’t just drop a new window over that and call it done. The steel and the damaged stucco have to be remediated regardless of which window type you pick - and that remediation is a scope item most bids leave out until the crew is already on site. We price it upfront because we inspect the opening before we quote, not after.
This is also where the climate and the code converge. Subtropical sun, heavy summer thunderstorms and hurricane-season rain mean every opening has to meet Miami-Dade HVHZ wind-loading and continuous flashing and waterproofing standards. A window that passes the wind test but sits on a compromised buck will still leak. The material is only half the story.

Andersen and Marvin Both Make the Right Window - Match It to the Opening
Here’s what makes the decision workable instead of stressful: Andersen and Marvin both offer HVHZ-rated products in both installation configurations. We aren’t locked into one method because that’s what happens to be in stock. Once we’ve inspected and documented the opening condition, we match the window and the installation to what the wall will actually support. You’re choosing quality from a curated set of trusted brand partners, not availability from whatever the truck carried.
That’s the same philosophy behind our full Windows & Doors work across the property - from foundation to finish line, the product serves the building, not the other way around. For homeowners weighing impact glass against standard glazing while they’re at it, our window replacement in Kendale Lakes page walks through the ratings and what drives cost.
What It Costs in Kendale Lakes
Impact window installation in Kendale Lakes typically runs $8,000-$25,000 for a whole-house package, while a standard window replacement lands in the $4,500-$15,000 range. The gap between them isn’t just glass - it’s the attachment, the NOA documentation and any buck remediation, which is why we quote after inspection.

| Scope | Typical Range |
|---|---|
| Window replacement (standard glazing) | $4,500-$15,000 |
| Impact window installation (HVHZ-rated) | $8,000-$25,000 |
Upfront pricing means the number you see is the number you pay. Projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months is available so a whole-house retrofit doesn’t have to wait for a windfall. Estimates and design consults are free - call (844) 834-8961 for an exact figure on your openings.
The Permit Sequencing Risk Nobody Warns You About
If a project starts as a replacement and the inspection reveals the buck won’t support an insert - or the reverse - switching from one installation type to the other changes the attachment method, and in Miami-Dade that triggers a re-inspection. It means new paperwork, a new inspection cycle and a delay in a job that was already scheduled. Homeowners who don’t know to plan for it get stuck paying for a paused project.
We avoid that by doing the opening inspection and documentation before the permit is filed, not mid-project. Get the substrate question answered first and the rest of the sequence stays clean. That’s also why our pre-installation opening inspection is documented and covered under the 730-Day Done Right Promise - if we misread the buck and water intrusion shows up within 730 days, fixing it is on us, not a dispute for you to litigate.
Because Kendale Lakes is HOA-heavy in the planned sections, architectural review can add its own approval steps before a single window arrives on site. Building that into the timeline from the start keeps everything moving.
Key Takeaways
- The block buck condition decides the method, not the catalog.
- Fin windows need a verified substrate and a valid NOA for that attachment; insert windows can be the compliant choice when the buck is compromised.
- Corroded galvanized sub-frames and cracked stucco are common in 1970s Kendale Lakes homes and must be remediated either way.
- Switching installation type mid-project triggers a re-inspection - inspect first, permit second.
- Calls are answered by a live person 24/7, and technicians have up to 12 years of experience.
FAQs
No. New-construction fin windows manage water best, but they require a sound rough-opening substrate and a valid NOA for the attachment method - and in Kendale Lakes’ CBS block homes, a compromised buck can make an insert window the stronger compliant choice. The wall decides. Call (844) 834-8961 and we’ll inspect before recommending.
Because many have galvanized steel sub-frames that have surface-corroded and expanded over decades, cracking the surrounding stucco and sometimes distorting the opening. That corrosion has to be remediated regardless of which window type you choose, so it belongs in the estimate from day one. Free estimates are available.
In Miami-Dade it triggers a re-inspection, because the attachment method changes and the permit has to reflect it. That adds a new inspection cycle and delays the job. We prevent it by documenting the opening condition before filing the permit, so the method is settled upfront. Call for a no-pressure assessment.
Yes - both offer HVHZ-rated products in both configurations, which is why we can match the window to your verified opening instead of forcing a product. That flexibility is a big part of why the recommendation follows the wall, not the brand.
If you’d rather have it looked at, Groundwork Construction Co. of Kendale Lakes offers a no-pressure assessment in Kendale Lakes - call (844) 834-8961. We’ll inspect the buck, document what we find, and tell you which method the code will actually approve.
Written by the team at Groundwork Construction Co. of Kendale Lakes, serving Kendale Lakes, FL.


