A Groundwork company - serving Kendale Lakes, FL
A living room with a wall of new windows and a sliding glass door

Windows & Doors Maintenance Schedule: What to Do and When

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Kendale Lakes

Last updated November 17, 2026

New double-hung windows in a dining room
A new front entry door with glass sidelights
A new paver pool deck
An open kitchen and dining area after a remodel
A freestanding soaking tub in a remodeled primary bathroom
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
A new black aluminum pool fence with a gate
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Windows & Doors Maintenance Schedule: What to Do and When

Here’s the part of impact window ownership almost nobody tells you: the manufacturer warranty on most impact-rated windows and doors requires documented annual maintenance. Skip the documentation, and that gap is exactly what gets used to deny a claim. We’ve watched a homeowner in Kendale Lakes get turned down on a seal failure that was a clear factory defect, purely because no one could show a single maintenance record. Impact windows and doors in South Florida run on a different clock than standard windows: the wet season, the dry season, and hurricane prep each demand specific tasks. This guide lays out the full schedule.

Call (844) 834-8961

Quick Answer

Clean and inspect your impact windows and doors quarterly. Lubricate multipoint locks and hinges every six months. Replace weatherstripping and check seals annually before hurricane season (June 1). Document every inspection with photos and dates. In Kendale Lakes, the wet season from late May through October means drainage and seal work has to happen in April and May, not when the first storm is at the door.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Table of Contents

Why Impact Windows and Doors Need a Different Schedule

Impact windows and doors are built to a different standard than standard residential glazing. They use laminated glass assemblies, heavier frames, and in the case of doors, multipoint locking hardware that engages at several points along the sash instead of a single latch. That’s what lets them meet South Florida’s wind-borne debris requirements. But the same engineering that makes them survive a storm makes them more sensitive to maintenance neglect.

The laminated glass itself is tough. The hardware and seals around it are not indestructible. In Kendale Lakes, we’re working with a climate that swings from 88-degree humid afternoons in August to dry, windy January mornings. That cycle expands and contracts aluminum frames slightly, stresses weatherstripping, and accelerates oxidation on hardware. A window in a milder climate might get away with an annual wipedown. Around Kendale Lakes, that same window starts showing corrosion pitting on handle sets and drag on door locks within a few seasons.

There’s also the wind-driven rain issue. In a broad swath of Kendale Lakes, homes sit on lots that pool water during heavy summer storms. Impact windows depend on the seal at the frame-to-wall opening as much as the window itself. Sealant that’s fine in February can fail by July if it’s not inspected.

What the manufacturer’s maintenance requirement really means is simple: you need a record that you did the work. Not a perfect record. A real one. A dated photo of clean hinges and a log of lubricant applied before the wet season is enough to satisfy most claims reviews. The homeowners who get denied are the ones who can’t show anything.

We’ve been in homes around Kendale Lakes where impact windows installed a few years earlier looked brand new, and others from the same model year that needed full hardware replacement. The difference was almost always the maintenance calendar, not the product.

The Quarterly Maintenance Calendar

Set four dates on your calendar: early January, early April, early July, and early October. Those four points align with Kendale Lakes’s seasonal shifts: dry season in winter, wet season prep in spring, peak rains in mid-summer, and post-season assessment in the fall.

January (dry season inspection): This is your best window to do detailed work. Humidity is low, storms are rare, and any sealant you apply has time to cure before rain. Check every operable window and door for smooth operation. Look for weatherstripping that’s compressed or pulled away. Wipe hardware with a microfiber cloth.

April (pre-wet-season prep): This is the big prep month. Inspect and reapply sealant around frames. Clear weep holes and drainage channels. Lubricate every hinge, roller, and lock mechanism. Verify weatherstripping on all exterior doors. This is your last chance to catch small problems before they get expensive.

July (mid-wet-season check): Walk the interior perimeter after a heavy rain. Any dampness along the frame or the drywall next to a window means a seal has failed. Check for water marks, discoloration, or paint bubbling near window and door openings. Note anything suspicious and schedule a repair inspection. Have the phone number of a reputable contractor on hand.

October (post-season assessment): After the wet season closes, do an honest review. Which windows stick? Which door is dragging? Which lock is stiff? Make a list. Doing this now gives you five to six months to schedule repairs before next hurricane season.

Cleaning Aluminum Frames and Hardware Without Accelerating Corrosion

Most cleaning products sold for windows are formulated for glass and vinyl, not anodized aluminum and impact-grade hardware. This is where a lot of hard-earned money gets spent fixing a problem the homeowner made worse.

Here’s the wrong way and why:

  • Bleach-based cleaners attack the anodic layer on aluminum and accelerate pitting. Skip them entirely on frames.
  • Abrasive scrubbing pads scratch the finish, leaving microscopic grooves that trap moisture and salt.
  • Acid-based bathroom cleaners (many “soap scum” formulas) are harsh on pivot hardware and hinge finishes.
  • Pressure washers force water past seals and into weep channels that aren’t designed for high pressure.
  • Lubricant overspray that drips onto the frame attracts dust, which then traps moisture.

Here’s the right method, and it takes about 20 minutes per window:

  1. Rinse frames with plain water from a garden hose. This loosens grit without pressure.
  2. Mix a few drops of mild dish soap in a bucket of warm water. Mild is the operative word: no degreasers, no bleach, no acid.
  3. Wipe frames with a soft microfiber cloth. Wring it out so it’s damp, not dripping.
  4. Clean glass with an ammonia-free glass cleaner, especially on the interior. Ammonia attacks the film in some laminated impact glass assemblies.
  5. Dry metal surfaces completely with a second microfiber cloth. Do not let water sit on hardware.
  6. Apply a light coat of silicone-based lubricant to hinges, rollers, and locking mechanisms (more on this below).

Around Kendale Lakes, one detail matters more than the cleaning product: how quickly you dry the metal. Salt in the air is mild here compared to beachfront, but aluminum frames still pit faster if water sits in joints. Wipe dry, don’t air dry.

We’ve had customers ask why their impact window hardware looked chalky after two years. In almost every case, the culprit was a bleach-based cleaner used monthly out of habit. Switching to soap and water stopped the problem.

Multipoint Locking Systems: The 10-Minute Task That Prevents a $400 Service Call

Impact-rated exterior doors almost always use multipoint locking hardware: a tall handle set that engages multiple locking points along the door edge at once. When it works, it’s effortless. When it doesn’t, you’re looking at a door that won’t seal, catches air, and eventually won’t close at all. The fix is usually a service call that runs several hundred dollars, plus a wait for parts.

Almost every one of those failures starts as a stiff lock that could have been lubricated in ten minutes. In our experience, multipoint systems are the single most neglected component of an impact door. They’re inside the door, they’re hard to see, and they only get noticed when they fail.

Here’s the calendar:

  1. Every six months (April and October work well), apply a dry silicone spray lubricant to the lock mechanism and the deadbolt throw. Do not use oil-based lubricants. Oil attracts dust and dirt, which turns into a grinding paste inside the mechanism.
  2. Operate the lock fully open and closed three or four times after lubricating. Feel for drag or roughness at any point in the throw.
  3. Inspect the strike plates on the door frame. Loosening screws or a shifting plate is a warning sign. Tighten any loose screws with a screwdriver, don’t overtighten.
  4. Check the alignment by holding a straight edge against the door edge and frame. Any gap that varies along the door height suggests the door has shifted. Call a professional.
  5. Test the seal by closing the door and running your hand along the perimeter on a windy day. Feel for air movement. If air passes where the lock engages, the hardware is not pulling the door tight.

In Kendale Lakes, the wet season puts real stress on exterior door hardware. Doors swell slightly in humidity, then shrink in dry season. The multipoint system compensates for some of that movement, but if it’s already stiff, the swing between wet and dry will eventually cause misfit. Don’t wait for a lockout to notice it.

The Annual Weatherstripping Inspection Most Homeowners Skip

Weatherstripping is the foam, rubber, or brush material along the sash edges and door frames that seals the opening against air and water. On impact windows and doors, it’s usually a compressed foam or bulb seal, and it does two jobs: keeps water out and keeps the air conditioning bill down.

Most homeowners skip this inspection. Then they get a July electric bill that’s $80 higher than expected and assume it’s just the heat. In our experience, a compressed seal on a sliding impact door is a common culprit. It’s also one of the easiest things to check and replace.

Here’s the annual inspection routine, done in April before the wet season:

  • Visual check: Open every operable window and exterior door. Run your finger along the weatherstripping on the frame. It should feel springy and uniform. Compressed, cracked, or missing sections need replacement.
  • Dollar bill test: Close the window or door on a dollar bill at several points around the perimeter. If the bill slides out easily, the seal isn’t tight there.
  • Air test: On a windy day, run your hand along the interior edge of every exterior opening. Any airflow is a gap the seal isn’t closing.
  • Water test: On a light-rain day, watch the interior perimeter of windows and doors for drips. Any water coming in needs attention.

Replacement weatherstripping is inexpensive and available at most hardware stores, but matching the right profile to an impact window sash can be tricky. If the seal is integrated into the sash or frame, it usually has to be replaced by a professional. This is one we’d recommend calling in for a quote rather than trying to source an exact match yourself.

If you’re already planning improvement work and want a single contractor to handle window and door issues alongside other systems, our team at Groundwork Construction Co. of Kendale Lakes home covers the whole scope from foundation to finish line.

Hurricane Season Prep: What to Do Before June 1

Hurricane season runs June 1 through November 30. In Kendale Lakes, the first month of the season is usually quiet, which tempts homeowners to think they have time. They don’t, because the work you need to do should be finished by June 1, not started on June 1.

Here’s the checklist we recommend running through in May:

  1. Inspect every impact door for full multipoint lock engagement. Close and lock each one several times. Any stiffness, jerking, or refusal to fully engage needs a service call before the season.
  2. Verify weep holes are clear on the bottom frame of every window and sliding door. Weep holes drain the frame channel. If they’re clogged with debris, water backs up and finds the interior.
  3. Re-seal frame-to-wall joints with exterior-grade sealant. Kendale Lakes gets substantial wind-driven rain, and the sealant joint is your first defense.
  4. Test the impact glass by looking for chips, cracks, or delamination (the film separating from the glass). Small chips mean the assembly has lost integrity. Replace the unit.
  5. Check the window screen and hardware for corrosion and loose fasteners. Tighten anything that’s loose and consider replacing pitted screws.
  6. Photograph every opening in full and take close-ups of hardware. This documentation is what insurance adjusters ask for if a claim comes.

One more item that gets overlooked in Kendale Lakes: rolling shutters and accordion closures. If you have them, they need the same pre-season attention. Same story with garage door tracks and springs, which is a safety item because high-tension springs and cables are dangerous to touch. Call a trained professional for anything involving those. Roof ties and soffit inspection also fit into the pre-season schedule, but they’re not part of window and door maintenance. If you’ve been meaning to add a covered patio or outdoor structure, our team at Home Additions & ADU in Kendale Lakes handles structural improvements that tie into these exterior systems.

What to Document for Warranty and Insurance Claims

Most impact window and door warranties require “documented annual maintenance” without spelling out exactly what that means. That ambiguity is why keeping a clean record matters. Here’s what we recommend:

  • A dated photo log: Take photos of every window and door on the same day you do the maintenance. Close-up of hardware, clean hinge, weatherstripping in good condition. Save them to a cloud folder. Four photos per quarter is more than enough.
  • A lubrication log: A simple list of dates when you applied lubricant to locks and hinges. This is the single most-requested record when a lock or hinge fails.
  • Purchase and install records: The original manufacturer paperwork, the install date, and the installer’s contact information. Most impact window warranties are 10 years or more, and you need the paperwork in case the installer changes hands.
  • Any professional service records: If a contractor inspects or repairs your windows, keep the invoice and the service report.
  • Pre-season photo set: One full-exterior photo of the home’s window and door openings in May, before storm season. This is the “before” reference for any insurance claim.

For an insurance claim after a storm, you also want the manufacturer’s product data sheet showing the impact rating. Ask for it at install time. If you’ve misplaced yours, we’ve been able to source replacements for several Kendale Lakes homeowners by reaching out to the manufacturer directly, and it usually takes a week or two.

Fence, driveway, and window and door damage from the same storm is handled differently by insurers. If you’re looking at fence repairs after a wind event, our team at Fence Installation in Kendale Lakes can quote that separately from window and door work.

Warning Signs That Need a Professional

Most maintenance is DIY-able. Some isn’t. Here’s what should trigger a call rather than a weekend project:

  • Water coming inside during a rain event, or water stains on the drywall near windows. This is a frame seal failure and usually requires removing and re-sealing the window opening.
  • Impact glass that’s cracked, chipped, or delaminating. Impact rating is gone once the glass assembly is compromised. This is a safety and insurance issue, not a maintenance task.
  • Door that won’t fully close or seal, or a multipoint lock that’s jerking, refusing to engage, or a handle that feels disconnected. These usually mean internal hardware failure or hinge misalignment.
  • A window that sticks, binds, or won’t open smoothly. This is often a product of a worn roller or warped frame. Sometimes fixable, sometimes needs replacement.
  • Visible frame corrosion that has worked past the surface finish into pitting. Once oxidation reaches this stage, professional repair or replacement of the affected frame segment is needed.
  • Anything involving a broken window in a second-story opening or any glass removal. Falls are serious business, and a trained glazier has the right tools and safety equipment.

Common Mistakes to Avoid

  • Using bleach-based cleaners on aluminum frames. This is the number one cause of early corrosion we see around Kendale Lakes. Bleach attacks the anodic finish, and once that finish is compromised, pitting starts fast.
  • Lubricating multipoint locks with oil-based products. Oil attracts dust and turns into a grinding paste inside the lock mechanism. Always use a dry silicone spray.
  • Skipping the weatherstripping inspection for years. Weatherstripping fails quietly, and the only symptom is a rising electric bill. By the time the homeowner notices water intrusion, the damage is already inside the wall cavity.
  • Doing maintenance in the wrong season. Kendale Lakes homeowners who do their prep in July are already too late. Sealant applied in high humidity cures slowly, and the wet season starts filling the frame channels before it fully cures.
  • Pressure-washing impact windows. The high-pressure stream forces water past seals and into weep channels, sometimes damaging the weatherstripping in the process. A garden hose and a soft cloth is all you need.
  • Not documenting anything. No photos, no lubrication log, no purchase paperwork. When a failure happens, the manufacturer has an easy out. The cost of this mistake can be the entire replacement unit.
  • Ignoring impact glass chips. A small chip that doesn’t look dangerous on a sunny day becomes a crack on the first category-1 storm. Chipped impact glass is compromised glass. It has to be replaced, not patched.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

When to Call a Professional

Call a professional for anything involving water entry, cracked or delaminating impact glass, a door that won’t fully seal, or a multipoint lock that’s failing to engage. Those are the situations where DIY fixes often cost more than the repair would have. Frame corrosion that has pitted past the surface, and any glass work on second-story openings, also need a trained hand.

For a repair quote that covers service, replacement, or a full window and door scope without the runaround, Groundwork Construction Co. of Kendale Lakes offers free estimates in Kendale Lakes. Our technicians are background-checked and arrive in uniform, and every project is backed by our 730-Day Done Right Promise. Call (844) 834-8961 to schedule your free estimate. Site visits help because Kendale Lakes homes vary widely block by block, and a real inspection tells you more than a photo ever will. If your maintenance needs extend past windows and doors, our team at Driveway & Pavers in Kendale Lakes covers exterior hardscape alongside window and door work, and our Groundwork Construction Co. of Kendale Lakes home shows the full service scope.

Frequently Asked Questions

A new casement window over a kitchen sink

The Bottom Line

Impact windows and doors are engineered for extreme wind and rain, but the seals and hardware around the glass still need a real maintenance rhythm. In Kendale Lakes, the right rhythm is quarterly: clean and inspect in January, do wet-season prep in April, check for water intrusion in July, and assess the season’s damage in October. Lubricate multipoint locks and hinges every six months with dry silicone, never oil. Replace compressed weatherstripping annually. Document everything: photos, dates, paperwork. That record is what protects your warranty and your claim. The homeowners who get years of trouble-free performance out of impact windows and doors are the ones who treat the schedule as seriously as their roof or HVAC.

Written by the team at Groundwork Construction Co. of Kendale Lakes.

Getting started with Groundwork in Kendale Lakes

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Kendale Lakes team

A local vetted partner works across Kendale Lakes and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Kendale Lakes? Licensed & insured · free written estimates
Call (844) 834-8961
Local Service Coverage

Request a Free Estimate in Kendale Lakes

Tell us what you need - Groundwork Construction Co. of Kendale Lakes responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch