







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Kendall, FL: What It Takes and What It Costs
Door installation in Kendall, FL usually runs $450 to $1,400 per door, and a typical single-door job is finished in one day. Entry and patio systems with framing changes climb toward $2,800. The number that matters most in Kendall is the age of your house: homes built between 1970 and 1994 often have builder-grade doors that no longer seal, latch, or hold up under hurricane-rated wind loads. Call (844) 834-8961 for a free on-site estimate.
How a Door Installation Actually Runs, Start to Finish

We don’t hand you a schedule and disappear. Here is the real sequence, with the decisions you’ll make and when.
Stage 1: Measure and site check (day 1, about 60 minutes). We measure the rough opening, check the framing for rot or settling, and confirm the wall type, since most Kendall homes are concrete block. You’ll decide the door style and swing direction here. If the opening is out of square, we note it now rather than after demolition.
Stage 2: Order and permit (days 1 to 14). Once you approve the bid, we order the door and pull the permit if the scope requires it. Miami-Dade product approval and engineering review can add a week or two to the lead time. You’ll sign off on the product approval documents so the door meets HVHZ wind-load standards.
Stage 3: Demo and prep (day 1 of install, 2 to 4 hours). We pull the old door and frame, inspect the rough opening, and repair any rot or damaged block. Flashing goes in before anything else. This is where a cheap job and a correct job part ways.
Stage 4: Set and seal (same day, 3 to 5 hours). The new door goes in, gets shimmed and plumbed, and we seal the perimeter with the right moisture barrier for our rainy-season climate. Hardware, lockset, and closer go on last.
Stage 5: Inspect and walkthrough (day of completion). We adjust the strike plate, check the weather seal, and walk you through operation and care. If a permit was pulled, we schedule the inspection and stand behind the paperwork. Most single-door installs are done in a single visit. Multi-door jobs take two to three days.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Weigh Before We Order
- Steel vs. fiberglass vs. wood entry doors: Steel is the most economical and holds paint well, but dents under impact. Fiberglass resists denting, moisture, and our intense sun, and it’s the sweet spot for most Kendall homes. Wood is beautiful and the priciest, and it needs refinishing every few years in this climate.
- Impact-rated vs. standard: In a Hurricane Andrew-era code zone, impact-rated doors with Miami-Dade product approval are worth the premium. They carry the wind-load rating insurers and inspectors expect.
- Slab vs. pre-hung: A slab door fits an existing frame and is cheaper and faster. A pre-hung unit replaces the frame too, which is the right call when the old frame is twisted or rotted.
- Interior doors: Hollow-core is light and inexpensive; solid-core blocks sound and feels sturdier. For interior openings, we frequently use Barrette and Master Halco door sets where the spec calls for them, and Ameristar hardware where durability matters.
- Hardware and finish: Cheap locksets fail first. We spec commercial-grade hardware on exterior doors and match finish to your trim.
What Door Installation Costs in Kendall, FL

Plan on $450 to $1,400 for a standard single-door install, and $1,800 to $2,800 for an entry or patio system with framing changes. The variables that push a job to the high end:
- Door size and configuration: A standard 36-inch door sits at the low end; double doors, sidelights, and transoms add material and labor.
- Existing condition: Rot, settling, or a block wall that’s out of square means repair before install. That’s often $150 to $500 extra.
- Material grade: Fiberglass and impact-rated units cost more than basic steel but last longer in this climate.
- Permit scope: Opening changes and structural work require engineering and inspection, which adds cost. A like-for-like swap often doesn’t.
Our written estimate lists the door, hardware, labor, disposal, and permit line by line. It does not include structural repair we can’t see until demo, and we tell you that upfront rather than surprising you mid-job. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Kendall Homes Specifically Do to This Job
Kendall’s housing stock is the story here. The sprawling 1970s – 90s subdivisions around Kendale Lakes and The Hammocks were built fast with builder-grade doors and hardware, and thirty-plus years of subtropical sun and summer rain have taken their toll. We regularly see doors that no longer latch, weatherstripping that’s crumbled, and thresholds that let water in during afternoon storms. Hurricane Andrew changed the code, so any door replacement that touches the opening now goes through Miami-Dade product approval and engineered wind-load review, a step contractors in some neighboring cities don’t face as uniformly. Many pre-1994 homes also have unpermitted enclosed patios or converted garages that surface during inspections, so we check the whole opening before we order. If your door work is part of a larger project, homeowners often pair this with Windows & Doors in Kendall or Cabinets & Countertops in Kendall to keep the schedule aligned. We cover all of Kendall, from 33176 out to Richmond Heights and The Crossings.
Serving Kendall, FL – Our Local Coverage Area
We serve Kendall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Door Installation in Kendall

A single door is usually installed in one day. Multi-door jobs take two to three days, and permit review can add one to two weeks to the lead time before install. Call (844) 834-8961 to get a realistic timeline for your project.
It depends on scope. A like-for-like replacement often doesn’t require a permit, but any change to the opening, structural work, or impact-rated door in the HVHZ typically does. We pull the permit and handle inspection when it’s required, and we tell you which category your job falls into before we start.
Yes, most door installs don’t touch plumbing or structure. The exception is an opening change or a door that reveals rot or settling, which we flag during the site check so you’re not surprised after demo.
Standard single-door installs run $450 to $1,400; entry and patio systems run $1,800 to $2,800. Call (844) 834-8961 for an exact quote, and estimates are free.
Every project is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. Material warranties come from the manufacturer. Ask us for the written terms at estimate.
Get a Free Door Installation Estimate in Kendall
Tell us what’s failing and we’ll tell you what it takes to fix it. Call (844) 834-8961 for a free on-site estimate for door installation in Kendall. On the call, we’ll ask about your door type, the age of your home, and whether you’re replacing one door or several. Then we’ll schedule a visit, measure the opening, and hand you a written, line-item quote. Our windows & doors service covers the full range, and this is where a smart upgrade starts. Built to last, backed in writing.
Written by the team at Groundwork Construction Co.












