







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Westchester, FL: What It Takes and What It Costs
Door installation in Westchester, FL typically runs $850 to $3,600 per opening depending on the door type, and a straightforward single exterior door is usually a one-day job once the unit is on site and the opening is verified. Entry doors, storm-rated exterior doors, and interior slab and prehung swaps all fall in that band. Call (844) 834-8961 for a free on-site estimate. Westchester’s tight lots, alley access, and hurricane-zone rules are what shape the schedule here, not the door itself.
How Our Door Installation Process Runs, Start to Finish

Every door job follows the same five stages. What changes is how much of the opening has to be rebuilt underneath the new unit. Here’s the real sequence.
Stage 1: Measure and site check (day of estimate, about 45 minutes)
We measure the rough opening, not just the door. On a 1950s or 60s CBS home in Westchester, that means checking whether the original jamb is plumb, whether the block has shifted, and whether the existing frame is tied into the stucco the way it was supposed to be. You decide the door type and swing direction at this stage. We put the findings and the exact price in writing before anything is ordered.
Stage 2: Product selection and ordering (2 to 10 business days)
In-stock interior slabs can land in a few days. Exterior doors built to Miami-Dade wind-load requirements, with the correct product approval paperwork, usually take one to three weeks. You confirm hardware, finish, and glass package here. This is the stage where lead time lives, and it’s the single biggest reason a door project stretches past a week.
Stage 3: Demo and opening prep (3 to 5 hours)
We pull the old door and frame, cut back damaged stucco or rot, and check the block for cracks around the corners. If the opening needs a new buck or a sill pan, that gets built now. On interior doors this is quick. On an exterior entry in Westchester, the prep is where the waterproofing detail gets set, and that detail is what keeps wind-driven rain out during a summer storm.
Stage 4: Set, shim, and seal (4 to 6 hours)
The unit goes in, gets shimmed plumb and square, and is anchored per the manufacturer’s approval drawing. Then comes flashing, sealant, and trim. On impact-rated exterior doors, the anchors and the seal are part of the code compliance, not cosmetic. You walk the door at this point and confirm the swing, the latch, and the sightline before we close out.
Stage 5: Final adjustment and inspection (1 to 2 hours, plus inspection scheduling)
We adjust hinges, strike plates, and weatherstripping, then test the door for a clean close with no drag and no daylight gap. If the job needed a permit, the inspection comes next, and we handle scheduling and the paperwork. You get a final walkthrough and the 730-Day Done Right Promise in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Door Options You’ll Choose Between
Most of the price movement comes from four decisions. Here’s the honest trade-off on each.
- Impact-rated fiberglass or steel entry vs. standard exterior: Impact units cost more but meet Miami-Dade’s High-Velocity Hurricane Zone requirements and typically qualify for wind-mitigation insurance credits. Standard exterior doors suit interior-adjacent openings or covered entries where code allows.
- Prehung vs. slab: A prehung door comes with the frame and is faster and cleaner to install. A slab reuses your existing jamb and costs less but only works if the frame is still sound. On older Westchester frames, a new prehung is often the smarter call.
- Solid core vs. hollow core interior: Solid core gives you weight, sound deadening, and a better feel. Hollow core is lighter and cheaper and fine for closets and secondary rooms.
- Hardware and finish: Rolling-code openers, keypad deadbolts, and smart locks add security and convenience for a modest upcharge. Barrette and similar brands offer matching exterior and storm-door lines if you want the front of the house to read as a set.
What Door Installation Costs in Westchester, FL

Here’s the working range for this market, per opening:
| Scope | Typical range |
|---|---|
| Interior prehung door, installed | $850 – $1,600 |
| Exterior entry door, impact-rated, installed | $1,800 – $3,600 |
| Slab replacement in existing frame | $600 – $1,200 |
| Storm or security door addition | $700 – $1,800 |
| Jamb rebuild or rot repair | $400 – $1,200 |
Five variables push a job toward the top of that band:
- Existing condition: a rotted jamb, cracked block, or failed sill pan adds repair scope.
- Material grade: impact-rated and premium finishes cost more than stock interior units.
- Opening changes: widening or relocating a door means framing and stucco work, which is a different job.
- Permit scope: exterior and impact doors in Westchester usually require a permit and inspection.
- Hardware and finish: smart locks, upgraded trim, and matching sets add up.
Our written estimate includes the door, hardware, prep, installation, flashing and sealant, trim, and permit handling where required. It typically excludes structural changes, significant rot repair found after demo, and specialty glass upgrades chosen after the order is placed. Upfront pricing, no surprises: the number you see is the number you pay. Call (844) 834-8961 to schedule your free estimate, and ask about 0% financing for 18 months plus $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Westchester Homes Specifically Do to a Door Installation
Westchester (ZIP 33165) is a built-out, largely post-1950s pocket of unincorporated Miami-Dade. There’s essentially no vacant land, so nearly every door job here is a replacement or retrofit on an aging concrete-block (CBS) home with a stucco exterior, not a new-construction install. That changes things in two ways. First, the original jambs are often 50 to 70 years old and out of plumb, so we plan for a prehung unit and a rebuilt opening more often than on newer stock. Second, because this sits inside Miami-Dade’s High-Velocity Hurricane Zone, an exterior or impact door usually triggers product approval and wind-load paperwork. As locals around the Westchester area know, the Notice of Acceptance process, not the carpentry, is what sets the schedule. Subtropical sun, humidity, and hurricane-season wind-driven rain also mean we schedule exterior work around afternoon storms and pay close attention to flashing and sealant at the sill.
Serving Westchester, FL – Our Local Coverage Area
We serve Westchester and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Door Installation in Westchester

A single interior door is usually a few hours, and a single exterior entry door is typically one day once the unit is on site. The product lead time, not the install, is what stretches the overall timeline. Call (844) 834-8961 for an estimate and a realistic order date.
Exterior and impact-rated doors usually require a permit and inspection under Miami-Dade’s hurricane-zone rules; interior door swaps typically don’t. We confirm the requirement during the estimate and handle the paperwork and inspection scheduling. Call (844) 834-8961 and we’ll walk you through it.
Yes, in the large majority of cases a same-size replacement installs in the existing opening with no trade work. Widening the opening or relocating a door is a bigger scope that involves framing and stucco repair. Call (844) 834-8961 to have us check your opening.
Interior doors run about $850 to $1,600 installed, and impact-rated exterior entries run about $1,800 to $3,600. Rot repair, jamb rebuilds, and hardware upgrades add to that. Call (844) 834-8961 for an exact quote; estimates are free.
All of our door installation work is backed by the 730-Day Done Right Promise: if it isn’t done right, we make it right. Manufacturer warranties on the door itself vary by product and run alongside our workmanship coverage. Call (844) 834-8961 to review the details.
Get a Free Door Installation Estimate in Westchester
If you’re planning door installation in Westchester, call (844) 834-8961 to schedule a free on-site estimate. We’ll measure the opening, check the jamb and stucco, confirm whether a permit is required, and put an exact, upfront price in writing before you commit. A live person answers around the clock. If the door is part of a bigger project, we also handle Windows & Doors in Westchester, and many homeowners pair this with Garage Conversion ADU in Westchester or Cabinets & Countertops in Westchester work. You can see the wider scope through our Windows & Doors service, and we cover the full Westchester area.
Written by the team at Groundwork Construction Co.












