







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Olympia Heights, FL: What It Costs and How Long It Takes
A chain link fence in Olympia Heights typically runs $3,500 – $9,000 for a standard residential lot, installed in two to four working days once materials are on site. The wide range comes down to linear footage, height, gauge, and how much old fence and vegetation has to come out first. A basic 4-foot run around a typical 1950s block home on a 7,500-square-foot lot lands closer to the low end; a 6-foot privacy-height run with galvanized posts and two gates pushes toward the top. Call (844) 834-8961 for a free on-site estimate with line-item pricing.
How We Build a Chain Link Fence Here, Stage by Stage

Chain link looks simple until you’re the one setting posts in Miami-Dade’s sandy, high-water-table soil. Here’s the actual sequence.
Stage 1: Layout and utility locate (day 1, roughly 2 – 3 hours)
We walk the property line with you and mark post spacing. Standard is 8-foot on-center for line posts, 10-foot for top rail spans. Before anyone digs, the 811 Sunshine 811 locate gets called and we confirm the property boundary against your survey. This is the stage where you decide the exact fence line, gate placement, and whether the run should stop short of the septic or pool equipment. Skipping the locate here is how homeowners find their irrigation lines with a post-hole digger.
Stage 2: Tear-out and clearing (day 1, afternoon)
Old rusted posts, concrete footings, and the bougainvillea that has eaten the last one all come out. We haul it. If your existing footings are still solid and at the right spacing, we can often reuse them and save you money. If they’re the old 1950s shallow pours, they come out. This decision gets made on site once we see what’s under the grass, and it’s the single biggest swing in labor cost.
Stage 3: Post setting (day 2)
Line posts go in 24-inch-deep holes, terminal posts deeper, set in Sakrete concrete and left to cure. This is a genuine wait day for the concrete, not a skip-it-and-hope situation. Terminal posts at corners and gates take a bigger footing because that’s where tension loads concentrate. You’ll see the layout taking shape, posts standing but no mesh yet.
Stage 4: Rails, mesh, and gates (day 3)
Top rail threads through post caps, tension bands go on, and the mesh gets stretched from the terminal post with a come-along. Gates get their frames, hinges, and latches. This is the day the fence becomes a fence. We pull test every span and adjust until the mesh doesn’t sag when you push on it.
Stage 5: Walkthrough (day 3 or 4, 30 minutes)
We walk the whole run with you, check every gate swing, and leave the written workmanship terms. Any tension adjustment, latch alignment, or tie-off fix gets handled before we pull out. Questions after? The number stays live.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Chain link is not one product. These are the real decisions that shape both cost and how the fence holds up in Olympia Heights’s salt air.
- Gauge: 11.5-gauge is the residential standard and the best value. 9-gauge is heavier, costs 15 – 25% more, and makes sense on long runs or where kids and dogs will be hitting it. 12.5-gauge is builder-grade and we don’t recommend it for a Florida coastal suburb.
- Coating: Galvanized-only rusts faster here. Vinyl-coated (green or black) adds roughly 10 – 20% to the material cost but resists the humidity and salt air that attack bare zinc. Black-coated fences also read more “finished” against a stucco house.
- Height: 4-foot is the code-minimum pool barrier in Miami-Dade; 5-foot and 6-foot run incrementally higher per foot. Determine what the fence is actually for before picking a height.
- Top rail and tension wire: Top rail adds rigidity. Bottom tension wire keeps the mesh from curling up at grade. Both are worth it on a run longer than 100 feet.
- Gates: Walk gates (3 – 4 feet) and drive gates (10 – 12 feet) price separately, and a drive gate needs heavier posts and a proper drop rod or caster.
- Post caps and finials: Small money, real visual difference, and caps keep water out of the post interior, which is where rust starts from the inside.
What Chain Link Fence Costs in Olympia Heights, FL

Expect $3,500 – $9,000 for a residential chain link fence in Olympia Heights, with most 150 – 200 foot runs landing in the $4,500 – $7,000 band. Here’s what moves the number:
- Linear footage: The dominant variable. Every additional 50 feet of 5-foot vinyl-coated fence adds roughly $700 – $1,100 installed.
- Existing condition: Old concrete footings, root systems, and fencing that has to be demolished and hauled push a job up $500 – $1,500.
- Terrain and access: A flat gridded lot is easy. A run that has to thread between a pool cage and a shed, or go over a buried utility easement, slows the crew and adds labor.
- Permit scope: A pool barrier or a fence over a set height triggers a Miami-Dade permit and inspection, adding $150 – $400 in fees and a short schedule extension.
- Gates and hardware: Each gate is a separate line item. Two gates and heavy-duty hinges can add $600 – $1,200.
A written estimate from us itemizes posts, mesh, gates, concrete, haul-away, and permit fees. What it doesn’t include: stump grinding, landscaping restoration, or a survey if you don’t have one. Upfront pricing, no surprises. Call (844) 834-8961 for your free estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Olympia Heights Homes Specifically Do to This Job
Olympia Heights is unincorporated Miami-Dade, ZIP 33165, built out mostly in the 1950s through the 1970s. That matters here for two reasons. First, every chain link fence project runs through county permitting and inspection, not a city building department, so the review timeline follows Miami-Dade’s schedule. Second, the housing stock itself fights you. The lots are gridded and generally rectangular, which is easy, but the ground is a layered mess of old footings from multiple fence generations, irrigation runs, and mature ficus and podocarpus hedges that have to come out root ball and all. On blocks off SW 40th Street and around the Coral Way corridor, we regularly see a 4-foot original fence half-swallowed by a hedge, with the old galvanized posts rusted through at grade from twenty years of humid air and Biscayne Bay salt. The salt air is the real local failure mode: it eats bare galvanized hardware faster than anything inland, so we lean toward vinyl-coated mesh, coated tension bands, and caps on every post. Where a rear addition is going in and the fence line has to be reworked around it, homeowners often pair this with ADU Site Prep & Utilities in Olympia Heights or a fresh Door Installation in Olympia Heights once the new structure is closed in. If the fence is part of a larger yard overhaul, our Fence Installation in Olympia Heights page covers the full scope, and you can see Olympia Heights service coverage for scheduling. Our technicians have up to 12 years of experience setting posts in this soil.
Serving Olympia Heights, FL – Our Local Coverage Area
We serve Olympia Heights and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Olympia Heights

Most residential chain link fences in Olympia Heights take two to four working days on site, from layout through the final walkthrough. The concrete curing between post-setting and mesh-stretching is a real day in that count. Permitting through unincorporated Miami-Dade can add one to three weeks to the front end depending on scope. Call (844) 834-8961 for a schedule estimate once we’ve seen the property.
Yes, in unincorporated Miami-Dade a residential fence generally requires a permit and a final inspection, and pool barriers have their own additional requirements. Because Olympia Heights is unincorporated, it’s the county, not a city, that reviews and inspects the work, and the fence has to meet county height and setback rules. We pull the permit and handle the inspection schedule. Call (844) 834-8961 and we’ll tell you exactly what your run needs.
Most chain link fence jobs in Olympia Heights run $3,500 – $9,000 depending on linear footage, height, gauge, coating, gate count, and how much old fencing has to come out. A straight 150-foot run of 4-foot galvanized fence is near the low end; a 6-foot black vinyl-coated perimeter with two gates is at the top. Call (844) 834-8961 for a line-item quote. Estimates are free.
Bare galvanized chain link hardware does corrode faster in Olympia Heights than it would inland, because the salt-laden air off Biscayne Bay attacks the zinc coating and the exposed hardware first. The fix is straightforward: choose vinyl-coated mesh and posts, use coated tension bands and post caps, and keep the bottom of the posts clear of soil that traps moisture. We spec the corrosion-resistant options as the default here and will show you the upgrade cost. Call (844) 834-8961 to talk through it.
Every chain link fence we build is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If a post shifts, a gate sags, or a tension span fails within that window, we come back and fix it. Material warranties from the manufacturer ride on top of that. The terms are in writing before the first post goes in. Call (844) 834-8961 with questions.
Get a Free Chain Link Fence Estimate in Olympia Heights
Call (844) 834-8961 and a live person answers, day or night, no voicemail. We’ll ask about your property line, height, and gate needs, then book a free on-site estimate where we measure the run, check what’s buried, and walk through the gauge and coating options. You’ll get a line-item written quote, permit handling, and the 730-Day Done Right Promise before any work starts.
Written by the team at Groundwork Construction Co.












